CBF250

xrsism

New Member
I started this project back in 2013. Was a pretty low cost budget build. This time I am giving it a bit more effort.

Story goes it was my first streetbike and I got my licence on it. After getting a full licence it got used less and less and I even gave it away at one stage. It came back a little worse for wear and again sat for another year.

I bought a Norton fibreglass tank, clipons, exhaust, mikuni vm carb, r1 rearsets and have made a fibreglass reproduction of the steel seat unit that I made previously and a seat as well.

At the moment I have chopped all the various brackets off and putting in ones I need. Almost ready for painting.

20181108_224808_zps1pytjzop.jpg


20181108_223517_zpsvyqsvqb4.jpg


20181108_223315_zpsbbk7cayu.jpg
 
Sorry all but this is being mothballed for a while.

Had a car turn in front of me Sun night and long story short I have 3 fractured vertebrae. Gonna be a few mths till I post again
 
Heal up quick. I know that as soon as you can get back to working on the bike it is great therapy. Hope the driver was charged.
 
Back
Top Bottom