Yamaha TW200.. the swamp donkey

Ive been slacking a bit on updates, but I have still been tinkering around on this thing. I pulled the motor out and finally got the side cases (that a previous owner had graciously decided to use jb weld as "gasket material") pulled off, beit with a good amount of grunts, bloody knuckles and ez outs since ever single phillips head had been rounded off. What I found when I drained the oil was a highly undesirable paste of goo and metal shaving, along with a little more goo, and just when I thought I had found it all, more metal shavings.

Now, after a little bit of google-fu and some forum reading, ive found that these little tw lumps are notorious for shedding metal shavings, and there is a hippy esqe attitude in "the tw200 groups" of shavings are fine, just run it, but even so, there seemed to me an obnoxious amount of them. I figured no time like the present to dig in and see where they are coming from. I wasn't planning on splitting the cases, but I guess plans change. Upon removing the inspection cover for the cam chain, I had a "well theres your problem" moment. The engine was pretty obviously starved of oil at some point and the aluminum cam bushing had been eaten away.

To remedy this I will need source a roller bearing and a new cam. Its been done before and documented, so hopefully wont be to big of a deal.

Also, here is the expected pic of parts piling up for the build ;)
659f3f33ab3708fdbd93260cc3bcf9f8.jpg
4ff695e68a94379e534077b9090b4191.jpg
d96322b9f58fb2e8cadb7b7ed10fe56b.jpg
a4ea61cbe0444f95eb6dc9075b1e7ec7.jpg
9d8e15ef8f2dcb71ac7628c57671d13e.jpg
81a268dfe2afc6f92e7c7a71da53bf0b.jpg
2351c628e2c704dc322278b421a8849d.jpg
df30b445be9e5c023786ed85e3383968.jpg
5af2d1298d6bef8d6841f31abe1711cd.jpg
40e0ce623d7ad2a11969c37ee60c7704.jpg
 
Just curious if you're to the point where this becomes a parts bike for another one, or if it's really worth rebuilding what you have.
 
I knew you should have kept that XL650 lump! Some silicone spray, a shoehorn, and a little time and you'd be riding.
 
canyoncarver said:
That was a lot of metal in there. What's the parts scene like on these motors?
irk miller said:
Just curious if you're to the point where this becomes a parts bike for another one, or if it's really worth rebuilding what you have.
cbrianroll said:
Doesn't their 250 motor fit it or parts compatible? I thought my buddy mentioned something like that.
Not sure I'm ready to give up yet. Entire engine swaps are pretty tricky due to the extreme offset on the countershaft sprocket. There is actually an outer carrier bearing that is part of the sprocket cover. Even a bw350 motor utilized a jack shaft on the swinger, so its not a real easy swap at that. Heads, however are a little easier to come by. I don't have the list handy, but a number of tt225 xt225 xt200 and a few others are direct swaps, and can be had complete with cams, valves and rockers for around $70 used.

That said, if I find a complete better tw200 for a reasonable price, this one will quickly become a parts mule.

Sent from my SM-G920V using Tapatalk
 
That engine looks a hell of a lot like a sr250 so that might be an option as well.
 
Brodie said:
That engine looks a hell of a lot like a sr250 so that might be an option as well.
They say the sr185 head will work, but no mention of the sr250

Sent from my SM-G920V using Tapatalk
 
Fair enough. I have a spare sr250 cylinder I can measure if you need.
 
Brodie said:
Fair enough. I have a spare sr250 cylinder I can measure if you need.
I may take you up on that! Much thanks!

Sent from my SM-G920V using Tapatalk
 
Do you have the ID and OD of that bushing? I mean it doesn't look too bad and throwing a ball-bearing in, shouldn't be the end of the world or have I missed out on another failure?
 
So after some more digging through the motor, I just found way to many shavings and other unsavory chucks of metal. I decided to jettison the stock lump in favor of a predator 212cc with a torque a verter clone, and just end up with a big ol fat tire mini bike/ pit bike.

Here's the engine sitting roughly where it'll go.
1d9ec5d1cf1baa7a628f0dcf565487aa.jpg


Sent from my SM-G920V using Tapatalk
 
During my mid Ohio swap meet adventures, Mr.E made a stupid impulse decision and bought a $10 steel Honda atc tank. Worked out well for me, because between that and the $5 Yamaha dirtbike seat, this thing will be sitting pretty.
a24b64d113d06f78da341436884d2db2.jpg
b830a12294e296b29e02a4dae4500cd6.jpg


Sent from my SM-G920V using Tapatalk
 
The rear subframe has a weird drop seat Style Bend in it which did not work well with the flat bottom vintage dirt bike seat, so after a couple hours of cutting and de tabbing the frame along with bending up some 1/8" wall 3/4" inch OD tubing, I have a subframe that fits much better. I left the frame a little long until I decide what I am doing to mount a fender and possibly a luggage rack. There will be more bracing added, but the basic shape is there.
3d88fbfe99a4bd45812abf70af78de6f.jpg
3f21959208637c5d15755e0fef333014.jpg
e9e8084f35d8c1e0d2778e7e5cb7704c.jpg
e1cce896d7bf19859ee516699f92e2d5.jpg
d6c3f9cc3150a8ead65003ba53199f78.jpg
d2c3aa0689ebfd66f421a7acf784deaa.jpg


Sent from my SM-G920V using Tapatalk
 
Ran out of mig wire while trying to finish up the sub frame, so I decided that I'd wire wheel the paint off of the tank. That is where I found this tasty morsel. Looks like I'll get plenty of practice pulling dents I guess lol
372dc06b507b0718c6008a7c1ec9670d.jpg
b67556f2683f3fd4e77002865738daec.jpg


Sent from my SM-G920V using Tapatalk
 
Back
Top Bottom