Cb360 another one

2507dbeedad9e3423f8068e683f5c884.jpg
938cca1b6c5c3b2519fdb2eba3423802.jpg
I was going for gun metal , this is cast iron color description, think it's a good match.


Sent from my iPhone using DO THE TON
 
6a75789dee7594fd721bf3c477c7c5bc.jpg
now that the motor is clean and painted I went ahead and started to tear it apart. Note the Deep South Texas snack , tostadas


Sent from my iPhone using DO THE TON
 
That's is above the cam chain tensioner. I can't tell because the picture is so close if this is the front side (exhaust side) of the engine above where the cam chain guide wound sit. Looks like the guide was not installed correctly and was thrashing around.

Not sure how that could rally happen though. That cover should hold the guide in place.
 
a19e362935ded02db8ee40709bdf41ba.jpg
homemade valve spring remover and stuff , $6 u clamp 8 inch , a modified socket, and a washer and thread rod and bolt


Sent from my iPhone using DO THE TON
 
Back
Top Bottom