Any one know how to make a break line????

I want to make my self a coustume brake line. It seams like it would be easy.
Any one out there with any info or sugestions on how to tackle this matter please feel free to chime Thanks!!!

Check your local listings for a Hydraulic Hose shop, one that makes hoses for industrial equipment, and give them a call. Some NAPA locations make hydaulic hoses as well. Bring them your brake line and tell them what you need done.

There's a shop local to me that fabs hydro hose. I brought them the three OEM rubber brake lines from my Hayabusa and had them duplicate them in Stainless Steel braided. Not only did they make them while I waited, but they also oriented the ends properly so there were no twists in the lines when installed. In and out for under $50. (comparable kits from Russels and Galfer run $150-$200)

http://www.cyclebrakes.com/index.html

They do custom brake lines for anything and everything. I'm ordering one of their 2 line kits to eliminate the splitter on the front forks. And you can get them in just about any color, or even with Aluminum ends...

Galfer USA will make any line you want as well. They also have an economical kit where you buy fittings, and premade lengths of hose. Unless you have a 6-8 point crimping tool I would not attempt to make you own lines.

Thanks for the info guys. @ Redbird Thanks i will look in to this.