collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

QUESTIONS ABOUT THE SITE? TROUBLE REGISTERING? ADMIN@DOTHETON.COM

Author Topic: CB 350F Getting there...slowly !!  (Read 20271 times)

Online jag767

  • DTT BOTM WINNER
  • *
  • Posts: 1122
Re: CB 350F Getting there...slowly !!
« Reply #130 on: Jul 30, 2017, 22:48:06 »
Get ready to relocate it then.

Offline 1fasgsxr

  • Posts: 987
Re: CB 350F Getting there...slowly !!
« Reply #131 on: Jul 30, 2017, 23:10:29 »
Yup...just hate to mess up this paint. It's actually decent paint.

Offline YogiBear

  • Posts: 1084
Re: CB 350F Getting there...slowly !!
« Reply #132 on: Jul 31, 2017, 02:34:10 »
Couldn't you leave the stock opening on the tank and run a hose from the tank opening back towards the back of the bike to a universal petcock and then the fuel line out to the carbs?

Offline cxman

  • DTT SUPPORTER
  • *
  • Posts: 2259
Re: CB 350F Getting there...slowly !!
« Reply #133 on: Jul 31, 2017, 08:33:33 »
make angle shim plates that go between the head and the spigot mount and tilt the carbs down

as i recall they sit on a angle anyways and that would just make the level

make them 3/8 to half inch and they will make the carbs sit back a bit to
1978 CX650 Super Deluxe
1979 XS1100 Special
1980 XS650
1980 cx500  The Beast
1983 GL650 i
1983 cx650 Custom
1973 CB450
1973 cb750
1980 cb750
1981 cb650
1982 cb900 c
1977  gl1000
1976 gl1000 LTD
 1983 GL1100 Nekid
and a bunch of others

Offline Hibby Jr

  • Posts: 26
Re: CB 350F Getting there...slowly !!
« Reply #134 on: Aug 01, 2017, 01:17:13 »
Space the carbs back  to get the clearance you need. As much as an inch would help add plenum to make up for running the velocity stacks without the air box anyway.

Offline 1fasgsxr

  • Posts: 987
Re: CB 350F Getting there...slowly !!
« Reply #135 on: Aug 01, 2017, 13:14:11 »
Im not sure I am sticking with the stacks. I might run K&N filters or even have an airbox made up. I may just have to bite the bullet and cut on this tank. I have a buddy with a red 350F too with a worse looking tank I may swap him out. Think I will move on for now, I have plenty of other stuff to do to it.

Offline 1fasgsxr

  • Posts: 987
Re: CB 350F Getting there...slowly !!
« Reply #136 on: Aug 02, 2017, 22:52:52 »
Here it is without the bowl on it...may have a solution though

Offline 1fasgsxr

  • Posts: 987
Re: CB 350F Getting there...slowly !!
« Reply #137 on: Aug 02, 2017, 22:56:26 »
Thinking this might work...CRF 250

Offline YogiBear

  • Posts: 1084
Re: CB 350F Getting there...slowly !!
« Reply #138 on: Aug 04, 2017, 00:17:27 »
^That's exactly what I had in mind when I posted before. Just didn't have a picture to go with it. I think that will solve your problem.

Offline 1fasgsxr

  • Posts: 987
Re: CB 350F Getting there...slowly !!
« Reply #139 on: Aug 04, 2017, 07:35:05 »
Have a new one on the way to test with.