1972 SL100 Lifan 200CC 163FML Engine Swap and 12V Upgrade

Nice build! I'll be following. I have a '75 CB125S2 that I wouldn't mind upping the CCs on.
 
Hey Forklift did you ever get this going? I am doing a full restoration of a 1972 sl100 and a lifan swap at the same time.
20180614_162544_zpsexqksuv9.jpg
 
he has it on the road last i talked to him he asked me about the vm28 mikuni carb i run on my cb100/lifan200
 
I will be going with that same mikuni carb also. This thread has been so helpful with my project. I am struggling with the wiring though.
 
yup that was a pita mine is all 12volt now

im going to do 2 cb125s with the lifan 200 and i think i i will get matt to make me 2 new harnesses with matching controls
 
Did you ever create a top engine mount for this?? I have a Custom Hardtail frame I am putting Boxer 200cc in. Boxer is Thai version of Honda/Lifan 200cc motor.
I would also like a good picture (s) of rear and front mounts too Multiple angles would be great!!

If you are using factory mounts can you supply Model and year or part number? (s)

Attached photo of Carb will work / works great as it is original for 200cc engine... I have several!

Keep in touch, please!
David (Chiang Mai, Thailand / Originally from Bothell WA... Saw your Washington plates!)
 

Attachments

  • WIN_20190128_15_52_08_Pro.jpg
    WIN_20190128_15_52_08_Pro.jpg
    86.3 KB · Views: 627
  • IMG_20190321_151226.jpg
    IMG_20190321_151226.jpg
    757.3 KB · Views: 313
i am just doing the final tweaks and dial in on a 1971 cb100 with the same lifan200
i got the set motor but the supplied carb sucked
so i have now replaced it with a vm28 mikuni
i have a custom exhaust while the jetting dial in is not perfect yet


Do you know exactly what Jets you used? I am completing this engine swap on my fully powder coated and restored sl100 and I am having issues getting it to run right with the Mikuni VM28-418 flatside carb.
 
i used a vm roundslide the flat slide would not be my choice for that motor
 
Back
Top Bottom