collapse

www.dimecitycycles.com

www.townmoto.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com

QUESTIONS ABOUT THE SITE? TROUBLE REGISTERING? ADMIN@DOTHETON.COM

Author Topic: Need help with 350F  (Read 321 times)

Offline 1fasgsxr

  • Posts: 1413
Need help with 350F
« on: Jul 30, 2017, 21:20:20 »
I have petcock to carb clearance issues to say the least...any ideas?
http://www.dotheton.com/forum/index.php?topic=41083.0

Life is a journey from the maternity ward to the crematorium....

Offline 1fasgsxr

  • Posts: 1413
Re: Need help with 350F
« Reply #1 on: Jul 30, 2017, 21:21:56 »
Rear of tank as it sits...
http://www.dotheton.com/forum/index.php?topic=41083.0

Life is a journey from the maternity ward to the crematorium....

Re: Need help with 350F
« Reply #2 on: Jul 30, 2017, 21:38:11 »
That's a tough one. And that 350F petcock design is unique, I think -- or at least not used for much else. Wonder if there is a way to remove the bowl and just make a flat cap and maybe grind back the fuel route a little, then run an inline filter. Might get you 1/2". Or fab something up..
"Remember when Goldwings were sexy? Me neither" -- Comet Tavern bathroom, Seattle.

Offline 1fasgsxr

  • Posts: 1413
Re: Need help with 350F
« Reply #3 on: Jul 30, 2017, 21:42:20 »
I will take the bowl off and see what kind of clearance it gives me.
http://www.dotheton.com/forum/index.php?topic=41083.0

Life is a journey from the maternity ward to the crematorium....