gs650g clutch wont disengage after putting wheel back on.

On my 1981 gs650g the clutch will not completely disengage. If i start it in first with the clutch in it will lurch and stall. It will start in neutral but if i shift to first it stalls even with the clutch in. I noticed that after putting the rear wheel back on there was a slight gap in between the shaft and the wheel, and am wondering if that may be part of the problem. Thanks so much!

Sounds like your clutch needs to be adjusted or you have some sticking clutch plates. Has the bike been sitting for a while since you last rode it?


Sent from my iPhone using DO THE TON