Hey folks, I've got a 73' cb350. Here's the problem. The bike starts great and seems to shift fine. In neutral it rolls free, as it should. I can shift down into first without a problem, except that the bike then starts to move forward and stalls. I've removed the clutch cover and rearranged the plates with a little bit of oil rubbed on each one and nothing seemed to change. With the bike turned off and in 1st gear with the clutch pulled in, I can move the bike forward but there is a ton of resistance and a clicking noise. I can see the clutch plates separate and it seems as though all the parts act as they should. I think this resistance is why the bike stalls out but I can't figure it out for the life of me. I have done the clutch adjustment to spec as well. Could there be a transmission issue? Any help would be greatly appreciated. Thanks.