I've finally got to the stage of my build where I'm comfortable enough to sell the take offs. I know eBay would probably be best, but I've never sold there before and would prefer the parts go to some fellow DTT knuckleheads. Local pickup/meetup preferred, currently located in 40353. Buyer pays shipping/Paypal fees. The prices below are OBO, and I would be willing to offer a bundle discount, including a pretty handsome one if anyone is willing to take everything. If you'd like any more detailed photos or have any questions feel free to reply here or send a PM.
(If I don't get rid of some of this junk my wife will Marie-Kondo the life out of me ;D)
From Craigslist post:
All parts removed from a 1979 CB750F Supersport with less that 21,000 mi. The bike was completely stock, with the original Honda inspection paint still on all the bolt heads (other than the handlebars which were replaced by the PO). The last photo is the actual bike before tear down began in November 2018. All parts have been stored in my house since removal. Everything was in working/riding condition and was only removed for a café/restomod build.
Parts Available:
Front end (clamps, forks, axle, calipers) - 250
Front rotors - SOLD
Rear wheel - 150
Rear rotor - 50
Rear brake caliper/master cylinder - 50
Swingarm - 30
Rear brake arm - 10
Rear axle and chain adjusters - SOLD
Air box with carb boots - SOLD
Front fender - SOLD
Chain guide - 20
Rear shocks - 20
Headlight - 30
Tail light - 30
Turn signals - SOLD
Horn - SOLD
Foot peg brackets - SOLD
Center stand - SOLD
Rear cowl 20
Stator (not working) - SOLD
Carburetors - SOLD
Dash - SOLD
(A few more odds and ends, see photos for everything)
(If I don't get rid of some of this junk my wife will Marie-Kondo the life out of me ;D)
From Craigslist post:
All parts removed from a 1979 CB750F Supersport with less that 21,000 mi. The bike was completely stock, with the original Honda inspection paint still on all the bolt heads (other than the handlebars which were replaced by the PO). The last photo is the actual bike before tear down began in November 2018. All parts have been stored in my house since removal. Everything was in working/riding condition and was only removed for a café/restomod build.
Parts Available:
Front end (clamps, forks, axle, calipers) - 250
Rear wheel - 150
Rear rotor - 50
Rear brake caliper/master cylinder - 50
Swingarm - 30
Rear brake arm - 10
Chain guide - 20
Rear shocks - 20
Headlight - 30
Tail light - 30
Rear cowl 20
(A few more odds and ends, see photos for everything)