I want to make a post of how I'm going to make an intake and fit a Mikuni VM22 spigot mount carb to a 74 CB125. I'm sorry I don't exactly know how to do this properly on this site. But I really want to document and show the process I'm going to do to put a good carb on this bike. I'm not even sure if this is where I should be writing this. If anyone is interested in this please let me know. Anyway, thanks.
I am kinda lost here.
- Thread starter sicnyk
- Start date
haircuttergirl
Over 1,000 Posts
Welcome to DTT!
Titan performance
Titan cafe racer builders.
Get it posted...let's see what you are doing. I'm helping a pal build a CG125 cafe bike, so always pleased to see other folks ideas.
Plus I may have to make a pair of manifolds for my T500 cafe racer.....as I bought some 34mm RG250 carbs which have a radical down draft angle on them which will not mesh with the stock manifolds.
Plus I may have to make a pair of manifolds for my T500 cafe racer.....as I bought some 34mm RG250 carbs which have a radical down draft angle on them which will not mesh with the stock manifolds.
