Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
The O-rings can be found seperately in universal sizes (make sure they don't melt when they touch fuel). And for the float bowl seal just go to your local shop and buy some gas resistant sealant and apply a light coat on top of your old rubber seal. but only do this when you are sure the right jets are in because it can be a pita to get it loose again.
Is that the right kit for my CM400? I know I need 2. Are the carbs the same for the cm400c cm400a & cm400T. Im ready to place an order.
ALready ordered the gasket material ask a backup. I seems like its something to have handy.
There are a number of different model VB carbs used on the CB/CM line. Check out the details here: http://www.hondatwins.net/forums/63-fuel-supply-carburation/21654-carb-information-years-jetting-more.html
Order complete found a quote on the link all gaskets are the same for the VB22 carb.
1 x Air Cut Off Valve (20-4020)
1 x Carb Pump Diaphragm (20-9041)
2 x Float Bowl Drain Screw (48-5042)
2 x P-16010-413-405 16010-413-405 GASKET SET
HerrDeacon said:
There are a number of different model VB carbs used on the CB/CM line. Check out the details here: http://www.hondatwins.net/forums/63-fuel-supply-carburation/21654-carb-information-years-jetting-more.html
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.