GV1390
Been Around the Block
***JMR aka MR.Rieck head: New valves, guide o-rings, Kibblewhite valve springs, Viton valve guide seals, OEM CB550 valve guides, stage 2.5 porting, Serdi valve job, milled head, backcut intake valves, etc)***
Here are a few pics, everything is still in packaging brand new. This head was vapor blasted by Nils (Resto Cycle) prior to porting:
Untitled by Gennaro Villella, on Flickr
Also have two AP Racing pull type 21.8mm master cylinders. Price is $50 each.
Brand new Pirelli Diablo Rosso III (120/70/17 & 160/60/17)....$220
Untitled by Gennaro Villella, on Flickr
Untitled by Gennaro Villella, on Flickr
Woodcraft 50mm 3 piece black clip-ons ($135):
Untitled by Gennaro Villella, on Flickr
A couple split CB550 motors:
Untitled by Gennaro Villella, on Flickr
Aluminum sprocket. Will double check how many teeth it has ($75):
Untitled by Gennaro Villella, on Flickr
I also have a TON of other parts....just a quick list of some of them that I'm willing to part with:
Marchessini front/rear wheels....front has both rotors and also have a single sided swing arm for the rear (These are VERY light)
Good compression CB550 motor
1" Internal throttle made by Christian Newman
Biltwell 1" bars
Clubmans 7/8th
5 3/4" H4 conversion headlights (2 sets)
Prices from an old FS thread I had made: http://forums.sohc4.net/index.php/topic,163997.0.html
***Prices are listed not including shipping unless indicated so. Please PM me if you have any questions or want further pictures of anything specific. These are just some parts that I'm willing to part with at this time but I surely will be updating this thread once I start digging into my parts piles.***
Thank you!
GV
Here are a few pics, everything is still in packaging brand new. This head was vapor blasted by Nils (Resto Cycle) prior to porting:
Untitled by Gennaro Villella, on Flickr
Also have two AP Racing pull type 21.8mm master cylinders. Price is $50 each.
Brand new Pirelli Diablo Rosso III (120/70/17 & 160/60/17)....$220
Untitled by Gennaro Villella, on Flickr
Untitled by Gennaro Villella, on Flickr
Woodcraft 50mm 3 piece black clip-ons ($135):
Untitled by Gennaro Villella, on Flickr
A couple split CB550 motors:
Untitled by Gennaro Villella, on Flickr
Aluminum sprocket. Will double check how many teeth it has ($75):
Untitled by Gennaro Villella, on Flickr
I also have a TON of other parts....just a quick list of some of them that I'm willing to part with:
Marchessini front/rear wheels....front has both rotors and also have a single sided swing arm for the rear (These are VERY light)
Good compression CB550 motor
1" Internal throttle made by Christian Newman
Biltwell 1" bars
Clubmans 7/8th
5 3/4" H4 conversion headlights (2 sets)
Prices from an old FS thread I had made: http://forums.sohc4.net/index.php/topic,163997.0.html
***Prices are listed not including shipping unless indicated so. Please PM me if you have any questions or want further pictures of anything specific. These are just some parts that I'm willing to part with at this time but I surely will be updating this thread once I start digging into my parts piles.***
Thank you!
GV