cushion drive for a spool hub

xb33bsa

Over 1,000 Posts
pretty self 'splanatory i wanted a cush drive on my SL/CL 350 hybrid so i cut off the cush drve of a yamaha dt hub and adapted it to the barnes hub that i am using
pics pretty much show what was done not shown in the added on hub is the bearing but yes it gets a bearing

pic 2 shows the majority of the machining, spoke flange removed and a register machined to fit the barnes hub
also i got rid of the cast iron center in the outer sprocket carrier and machined a better fitting lighter weight plastic delrin core/insert
 

Attachments

  • cushion drive 001.JPG
    cushion drive 001.JPG
    853.6 KB · Views: 471
  • cushion drive 002.JPG
    cushion drive 002.JPG
    872.2 KB · Views: 439
  • cushion drive 003.JPG
    cushion drive 003.JPG
    881.9 KB · Views: 441
  • cushion drive 004.JPG
    cushion drive 004.JPG
    869.6 KB · Views: 449
mo pics
 

Attachments

  • cushion drive 005.JPG
    cushion drive 005.JPG
    873.6 KB · Views: 432
  • cushion drive 006.JPG
    cushion drive 006.JPG
    813.4 KB · Views: 436
  • cushion drive 007.JPG
    cushion drive 007.JPG
    872.6 KB · Views: 432
  • cushion drive 008.JPG
    cushion drive 008.JPG
    880.4 KB · Views: 435
Back
Top Bottom