CB350/360 starter block off plug, speedo spacers, tach plugs

Re: CB350/360 starter block off plug

I'd also take one
pm when available if ya can.thanks.
 
Re: CB350/360 starter block off plug

I've got saw working at present so cut up some more bar.
Should have a couple made by end of next week.
I have one ready for CarolinaBoy if you still want it?
 
Re: CB350/360 starter block off plug

crazypj said:
I've got saw working at present so cut up some more bar.
Should have a couple made by end of next week.
I have one ready for CarolinaBoy if you still want it?

pm sent
 
Re: CB350/360 starter block off plug

Would these work in a '73 CB450? If so I have money in Paypal ready to send you.
 
Re: CB350/360 starter block off plug

the_nutt said:
Would these work in a '73 CB450? If so I have money in Paypal ready to send you.

I don't know about 450.
Can you measure the starter nose or crankcase hole? (accurately)
If it's about 1.800" it will fit but depth may need modifying?
I have one plug ready if anyone want's it and can make one in the morning tomorrow before I go to work.
I'm having second surgery on my arm on 8th June and don't know when I'll be able to make anything after that, got a lot of stuff to do in next few weeks
 
Re: CB350/360 starter block off plug

I've got some more starter block offs done.
Few people wanted them but I don't remember who I've replied to (going to have to make a list-next time :D )
 
Re: CB350/360 starter block off plug

Still don't know about 450, should have taken one to Dime City opening and checked.
Need someone with a CB450 to measure the hole size, it's probably same as 350/360 but don't know for sure.
 
Re: CB350/360 starter block off plug

i'll measure next weekend, or tomorrow if I have a second. What specifics do you need? Diameter only, or more info? I was recently looking into plugging up the hole for mine and was thinking of using a brass freeze plug, but your option looks great.
 
Re: CB350/360 starter block off plug

Thanks Pawn, Diameter and depth of hole.
Plugs are slightly more than 1.800" dia and about 1/2" 'thick'.
I'll PM you

PJ
 
Re: CB350/360 starter block off plug

I just measured my cb450. It is about 1.81 in diameter and the housing is about 5/8ths thick (my caliper wouldn't fit in the opening)
 
Re: CB350/360 starter block off plug

Sounds like it's common size for 350, 360 and 450 DOHC
 
Re: CB350/360 starter block off plug

if that's the case, let us know when you make some more!
 
Re: CB350/360 starter block off plug

I got mine today. It looks great. Hopefully I'll get it in this weekend.
 
Re: CB350/360 starter block off plug

ndromb said:
Hopefully I'll get it in this weekend.

;)
Well, did you 'get it in' ;D

I have a few made, can supply slightly different diameters (only a few thousandths of inch difference)
CB350 seems to be smaller than 360 by about 0.003"~0.005", still don't have a CB450 case to measure but it looks like it's same as 360
 
Re: CB350/360 starter block off plug

I still haven't "got it in" I've been too busy putting other things in other places.
 
Back
Top Bottom