ello Guys!
My name is Aris and i am from Mykonos, Greece,
Currently i am building a GS 750 into a cafe racer. I need your help as i am trying to change the left original switch to a aftermarket and i am completely new with the wiring.
The cables that are going to the the left switch from the main harness as you can see in the photo are:
ORANGE: Power from ignition switch
WHITE: Lighting switch to dimmer switch
YELLOW: HIGH BEAM
GREY: ILLUMINATION LIGHT
BLACK: Left hand turn signal
LIGHT GREEN: Right hand turn signal
LIGHT BLUE: Turn signal main
GREEN: HORN
BLACK/WHITE: GROUND
WHITE RED: to Rectifier
WHITE BLUE: to alternator
On the other hand the aftermarket switch has:
DARK BLUE: LEFT TURN
RED: TURN SIGNAL MAIN
LIGHT BLUE: RIGHT TURN
GREEN: SPLITS TO 4 CABLES
GREEN 1 to HORN
GREEN 2 to Light Signal
GREEN 3 to LIGHT SWITCH
GREEN BLACK to LIGHT SWITCH
WHITE BLUE: SPLITS TO 2 CABLES
WHITE 1 to LIGHT SIGNAL
WHITE 2 to low/high beam
GREY to HORN
YELLOW to LIGHT SWITCH
BLACK to low/high beam
I will really appreciate if you can help me with the wiring if this is possible to be done with this switch.
Thanks a lot
My name is Aris and i am from Mykonos, Greece,
Currently i am building a GS 750 into a cafe racer. I need your help as i am trying to change the left original switch to a aftermarket and i am completely new with the wiring.
The cables that are going to the the left switch from the main harness as you can see in the photo are:
ORANGE: Power from ignition switch
WHITE: Lighting switch to dimmer switch
YELLOW: HIGH BEAM
GREY: ILLUMINATION LIGHT
BLACK: Left hand turn signal
LIGHT GREEN: Right hand turn signal
LIGHT BLUE: Turn signal main
GREEN: HORN
BLACK/WHITE: GROUND
WHITE RED: to Rectifier
WHITE BLUE: to alternator
On the other hand the aftermarket switch has:
DARK BLUE: LEFT TURN
RED: TURN SIGNAL MAIN
LIGHT BLUE: RIGHT TURN
GREEN: SPLITS TO 4 CABLES
GREEN 1 to HORN
GREEN 2 to Light Signal
GREEN 3 to LIGHT SWITCH
GREEN BLACK to LIGHT SWITCH
WHITE BLUE: SPLITS TO 2 CABLES
WHITE 1 to LIGHT SIGNAL
WHITE 2 to low/high beam
GREY to HORN
YELLOW to LIGHT SWITCH
BLACK to low/high beam
I will really appreciate if you can help me with the wiring if this is possible to be done with this switch.
Thanks a lot
Attachments
-
93265141-5273-4A5D-A63B-E6D15F58A417.JPG2.9 MB · Views: 213
-
C6D15626-FAB0-494B-A898-18C360F1EFC5.JPG2 MB · Views: 212
-
8F524CBB-B360-4C60-9FC7-DCE09312129A.JPG1.7 MB · Views: 211
-
8E71209D-58BB-4E4D-ACF5-5ADEDFC31D4C.JPG1.4 MB · Views: 210
-
D6650E87-F918-4C91-9B86-0AFA2B8498F0.JPG1.4 MB · Views: 210