75CB750FOUR
New Member
Posts: 4
Like Steve McQueen All I Need Is A Fast Machine
View Profile
Email
Personal Message (Online)
I am currently selling this bike in columbus ga. 90 miles south of Atlanta.
I have a 1975 cb750k5 it has just under 16,000 original miles. I'm asking $3500 or best offer. Did a top end rebuild at 15,000 miles. All original parts that were replaced are included to include the original 4 into 4 exhaust pipes with baffles which are very rare since a lot of them have either been chopped or baffles removed. the only blemishes on the bike are a few scratches on the tank and a crack in the original seat. it has never been laid down and has a clean title. Nothing out of the ordinary for a bike that is nearly 40 years old. All parts that have been replaced by aftermarket I have the original parts as well. Here is a list of all the work that I have done to the bike.
-PAMCO Electronic Ignition (replaced the old points system so it fires up more like a modern bike)
-Top end rebuild at 15,000 miles
-Paulo Tarozzi Rearsets
-Clubman Handlebars
-Carbs rejetted and cleaned (over this past summer)
-New performance condenser coils as well as spark plug wires
-17 tooth front drive sprocket (gives it better low end torque)
-530 heavy duty chain
-Carpy square mini turn signals
-Carpy center stand bracket
-Pod Air filters
-battery tender
-4 into 4 drag pipes
-side mounted rear brake and license plate bracket
text or call me at (nine31)4^72-53two9
Like Steve McQueen All I Need Is A Fast Machine
View Profile
Personal Message (Online)
I am currently selling this bike in columbus ga. 90 miles south of Atlanta.
I have a 1975 cb750k5 it has just under 16,000 original miles. I'm asking $3500 or best offer. Did a top end rebuild at 15,000 miles. All original parts that were replaced are included to include the original 4 into 4 exhaust pipes with baffles which are very rare since a lot of them have either been chopped or baffles removed. the only blemishes on the bike are a few scratches on the tank and a crack in the original seat. it has never been laid down and has a clean title. Nothing out of the ordinary for a bike that is nearly 40 years old. All parts that have been replaced by aftermarket I have the original parts as well. Here is a list of all the work that I have done to the bike.
-PAMCO Electronic Ignition (replaced the old points system so it fires up more like a modern bike)
-Top end rebuild at 15,000 miles
-Paulo Tarozzi Rearsets
-Clubman Handlebars
-Carbs rejetted and cleaned (over this past summer)
-New performance condenser coils as well as spark plug wires
-17 tooth front drive sprocket (gives it better low end torque)
-530 heavy duty chain
-Carpy square mini turn signals
-Carpy center stand bracket
-Pod Air filters
-battery tender
-4 into 4 drag pipes
-side mounted rear brake and license plate bracket
text or call me at (nine31)4^72-53two9
