Hello,
First time poster here and first time spraying as well.
I have some brand new Moto Guzzi V7 "brushed aluminium and anodised" side fairings I would like to spray matt black and want to check if I have the right idea on what I'm doing.
1. Wash the panels with soapy water, rinse well and allow to dry. Anything else here?
2. Sand the panels with a medium course stand paper or sand block to scuff the surface.
3. Spray panels 2-4 times with a self etching metal/aluminium primer.
4. Spray with matt black metal/aluminium spray as per can instructions.
Am I missing anything? I am still looking for the primer and spray so any suggestions would be very helpful.
Also, I'm in London, UK atm with temperatures around 12-15 although I do have a garage I could close up if needed during drying sessions. Will the temps lengthen drying times?
Cheers in advance.
E
First time poster here and first time spraying as well.
I have some brand new Moto Guzzi V7 "brushed aluminium and anodised" side fairings I would like to spray matt black and want to check if I have the right idea on what I'm doing.
1. Wash the panels with soapy water, rinse well and allow to dry. Anything else here?
2. Sand the panels with a medium course stand paper or sand block to scuff the surface.
3. Spray panels 2-4 times with a self etching metal/aluminium primer.
4. Spray with matt black metal/aluminium spray as per can instructions.
Am I missing anything? I am still looking for the primer and spray so any suggestions would be very helpful.
Also, I'm in London, UK atm with temperatures around 12-15 although I do have a garage I could close up if needed during drying sessions. Will the temps lengthen drying times?
Cheers in advance.
E