Tytronic Ignition

9f9de0ba0e6aeab93dc4fb211bd009f3.jpg

Instructions are a funny read.
d1f21cac6c82679218038d4db61e6791.jpg



Sent from my iPhone using Tapatalk
 
Put those instructions through google translate half a dozen times... They will be much better!


Sent from my iPhone using Tapatalk
 
snmavridis said:
Have you hooked her up yet?
Sadly no. Trying to get the wiring finished but I did install it and see how it fit in the points housing. Pic later.
 
THIS is the most ballsy rip-off of a Dyna-S ignition. Look at their installation guide (for more info on how to install it and set it up) or simply build it yourself with a magnetic core and two hall-effect sensors.
 
Several months ago I installed the tytronic ignition on my '73 CL350 along with new coils, Rick's stator and reg/rec. It has been running reliably.
 
Yep Sonreir. Has a magnet pressed/swaged into the replacement cam points lobe.


Sent from my iPhone using Tapatalk
 
Hmm cheaper than pamco and dyna and seems to have good wires and connectors. Will definitely be looking.
 
Back
Top Bottom