Small Bike, lots of fun - Honda CG 125

mussulo

New Member
Hello forum :)

I'm a proud owner of a Honda CG 125, and writing from Portugal,
I really like my bike, but, as i don't like to have that "stock" bike, just as the same as others, i'm planing on do some mods (Sorry for the English),

So, this is the bike:
hwer2o.jpg


The deposit is from a MOTOZAX:
received_923537247811651.jpg


Allready done some cuts:
30c3xnd.jpg


30ngo7d.jpg


20f5kyh.jpg


and now, is like:
P_20171128_192211.jpg


Next, take the oils from the motor, and start the seat plate, and find a nice place to fit the turn lights
 
Welcome to the forum mussulo!

The SkyTeam 'Ace' crew on this site love the CG125 motor.

A picture of my 150cc 'Ace' on the road:
 

Attachments

  • 020315.jpg
    020315.jpg
    613.2 KB · Views: 290
Been away for a long time,
Spending the time cleaning some very small asses :p
So, the bike is almost fully dissembled, just need to take the front suspension,
The seat plate is allready on its way, and i have allready a lot of parts,

Right now, this is the "test" pic:

2qx9ah2.jpg


the motor will be painted in black.

2r4kl8m.jpg


Will be doing a cleaning in the front fork, changing the dust seals and etc. any nice place to buy these parts ? (Europe based),

Thanks and nice rides!!!
 
Been away from "The cave" for a while, Almost all of the parts have allready arrived (waiting for the shocks + light switches + brake levers), but, in my head, the final "picture" of the bike was a bit blured, so... Picked all the parts that i had, and put it on the bike, Really enjoying the result. The front fender will be "cutted" from the old one, allready have a sketch: .this week the wheels will be powder coated, i will show the final result!

fetch


fetch


Ride on!
 
Back
Top Bottom