OOracing CDI question

S

Swampnuts

New Member
Hey guys,

How did everyone go about getting the revs right when fitting the OOracing CDI if you didn't have a tacho on your bike? I mean obviously the screw adjusts the rev limiter and I guess you want it at about 9500, but did everyone just do it by ear, or attach a tacho to get the limit right?


Cheers!
 
I bought this one. Replaced the clock that shows the lights and stuff. Looks stock on the bike.

http://m.ebay.com/itm/12V-Silver-Tachometer-Gauge-0-13000-RPM-for-Car-Auto-Motorcycle-White-Face-/301712280843?nav=SEARCH
 
DSC_0333_zps4aax1fvr.jpg
 
don't bother with the rev limiter .but if you do,that tacho is cheap and easy buy. mine was the same and was a good addition to the bike,they were branded :kege: i think
my shift light is set at 10000rpm
 
My motor runs a different cam. 9000-9500 should be a good cutoff point


Sent from my iPhone using Tapatalk
 
Thanks guys, I ordered one of those Tachos. Bike is coming along pretty well, carb re-jet made a big difference and the free flow filter helped too, the main thing holding it back now is the exhaust, so I need to get onto that.

Hey out of interest, had anyone tried those generic blue racing CDIs e.g. http://www.coolsteratvparts.com/images/422a.jpg

I see you can get a six pin version so I assume it would work on the ACE
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom