Third Time’s a Charm

Nj732port

Coast to Coast
New whip
 

Attachments

  • E6B1CAB1-88A5-4A58-99A9-F2FE62FACA0C.jpeg
    E6B1CAB1-88A5-4A58-99A9-F2FE62FACA0C.jpeg
    3.8 MB · Views: 264
  • 5689DCA3-9DEA-4618-93C3-CA00A31C385A.jpeg
    5689DCA3-9DEA-4618-93C3-CA00A31C385A.jpeg
    4 MB · Views: 269
  • E256EB71-A170-4AEE-9A82-359D6C438D2F.jpeg
    E256EB71-A170-4AEE-9A82-359D6C438D2F.jpeg
    2.7 MB · Views: 261
  • 5C088408-36B7-4BE1-972E-A3F0D4E4FA3B.jpeg
    5C088408-36B7-4BE1-972E-A3F0D4E4FA3B.jpeg
    3 MB · Views: 256
  • AD47CB83-7CCD-4A54-BE4F-37DCE7C964C0.jpeg
    AD47CB83-7CCD-4A54-BE4F-37DCE7C964C0.jpeg
    1.6 MB · Views: 258
  • 1FE83911-6F3C-4CAB-AF89-2B85A2819082.jpeg
    1FE83911-6F3C-4CAB-AF89-2B85A2819082.jpeg
    1.5 MB · Views: 253
  • B2AC8CAC-595E-4355-9392-2BAA234D18A6.jpeg
    B2AC8CAC-595E-4355-9392-2BAA234D18A6.jpeg
    4.7 MB · Views: 248
  • E34F3877-3F7A-4D7D-9F9C-35778CD7C07F.jpeg
    E34F3877-3F7A-4D7D-9F9C-35778CD7C07F.jpeg
    1.7 MB · Views: 248
Some info: xs front fork, swing arm, and rear wheel. Wiring under th seat looks a little wild and it’s missing the left hand switches. The frame is cut under that big ass seat, the seat is big but comfy. Original carb super trap exhaust. Exhaust leak at the header and the diaphragms in the vm were brittle/flaking, the replacements are in the mail. 15 inch shocks but the rear feels still.
 
Just waiting on carb rebuild parts...i have pieces coming in from all over the place... vintage spoke seems to always have some delay...but they also have everything under the sun for SR's. Diaphragms are coming from vintage spoke, I have a basic rebuild kit at home, and brass is coming from Thumper stuff along with a new carb boot. Some brass was mangled, like the pilot jet and the float bowl drain screw. overall the carb was clean inside besides the crusty diaphragms breaking up. I couldnt tell what pilot was in the carb so ill either go with the mangled one or a new 25, the main was at 290 which doesnt make sense if stock is 300 and this bike has a pod and super trap... the VM34ss is a pain in the ass to remove and tune so im hoping to only do this once. should i leave what was working or put in what should be in the carb?
 
Back
Top Bottom