CB350/360 starter block off plug, speedo spacers, tach plugs

Re: CB350/360 starter block off plug

A "plug" for the plug guy... ;D
Bought mine a while back, it arrived in no time, I polished it and installed it and it's awesome! You know you want to, just buy the damn thing.
Nice work Crazy, hope your arm heals soon and everything else falls into place.
Garrett from Calgary
 
Re: CB350/360 starter block off plug

crazypj said:
;)
still don't have a CB450 case to measure but it looks like it's same as 360

Sorry about that. My cage developed a few issues in the last month and all of my bike funds were spent on it.
 
Re: CB350/360 starter block off plug

No problem, stuff happens all the time

Well, I had a look at the eBay ones and they list it as fitting 450 so I guess it fits DOHC 450 8)
I have a couple roughed out, need finishing off. (I think I mentioned I got some started before surgery)
I can probably do them right handed, it will just take a lot longer, not a problem, I have time at present ;D (takes about 40 mins to finish from where they are now, with both hand's working :eek: )
 
Re: CB350/360 starter block off plug

If you have any available I need one for a 350. PM me? Thanks.
 
Re: CB350/360 starter block off plug

I look at mine almost every day. Some day it will make it in--it's such a nice piece.
 
Re: CB350/360 starter block off plug

crazypj said:
;)
Well, did you 'get it in' ;D

I have a few made, can supply slightly different diameters (only a few thousandths of inch difference)
CB350 seems to be smaller than 360 by about 0.003"~0.005", still don't have a CB450 case to measure but it looks like it's same as 360

Do you still have some? Would like to have one for my cb450.

PM please :D

Thanks.
 
Re: CB350/360 starter block off plug

Hi Everyone,
I should have a few starter plug made this weekend.
I'll post up when they are done and you can PM me for paypal.
 
Re: CB350/360 starter block off plug

(marking) so i will see when this is updated. interested in one for a 350.
 
Re: CB350/360 starter block off plug

Looks like I'm going to be busy tomorrow 8)
I'll be keeping Post Office, Paypal and 'Uncle Sam' happy ;D
 
Re: CB350/360 starter block off plug

I got some ready to go
2 gone already and a third possible.
PM if you want one, I've spent a couple of days making a few
I even made 2 for me this time, not selling those ;)
 
Re: CB350/360 starter block off plug

All sold. :eek:
I'll make some more this week
 
Re: CB350/360 starter block off plug

Just had to show what happens when you measure once, cut twice.
I knew I should have checked, particularly when I was going for 'extra light' (well, it is ;D )
It was 99% finished before it got totally finished ::)
Majoroops.jpg
 
Re: CB350/360 starter block off plug

Route a grove in it and fix in some acrylic or plexy and do some cool engraving on it. ;D
 
Re: CB350/360 starter block off plug

This piece looks nice. Just an FYI- my honda CB200t starting hole opening is 1.806" and about .6" deep or so. I am thinking this might work on that bike as well. Are you able to post pics of the item from front and back so I can see how its mounted. If it looks like it will work, I will probably get one and can verify it fits for you on the 200s, which I guess would mean it would also work on the cb175.
 
Re: CB350/360 starter block off plug

Mounts with two stainless steel screws and spring washers.
You can rotate it for best fit on inside of case.
I'll PM you
 
Re: CB350/360 starter block off plug

pj,

Any thought to making carb sync adapters again in the near future. If so I'm down for a set
 
Re: CB350/360 starter block off plug

Give me a week, I'm on vacation (and unemployed ;D )
It was planned in March before everything went 'tits up'
Are they for 350 or 360?
Stub mount or flange mount?
Any particular length or same as last ones I made?
 
Back
Top Bottom