Unnamed RD

Not much progress lately. I will let the pictures talk:
ebu4e8ym.jpg
8ymymytu.jpg
basetaqa.jpg

Now I need to figure out how to get my lights to work as brake, tail and, turn signals.
pabypa8e.jpg
qusaqype.jpg

I am waiting on spokes and my stuff from the powder coater. I did manage to get my Rd 200 going and found a guy to make me some chambers for it. That bike will be a blast.

Sent from my SM-N900V using Tapatalk
 
http://www.harrisonspecialties.com/smart-flash-led-control-module/

This would be your best bet is you want to make the lights work like that. Going to to LED turns on mine later and was going to use that. Works like on this youtube video:

http://youtu.be/4ebCO2OGC2I
 
Finally, got to work on my motorcycles again.
Wired up and working.
24432022296647a878e31907beb9e251.jpg
46bbc6e82b88088f714af93b34ed8e9d.jpg
172d29f3c00c9bd03b3582f72127a111.jpg

Clip ons and tires are next then I can get the controls and cables dialed in.
Therapeutic last couple nights, wiring is a pain.
 
Back
Top Bottom