Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
just curious if you figured out why the oil is getting into the exhaust? Thing was smoking like crazy in that video. Did it work itself out after getting her nice and warm rode a few miles. ?
Most of the smoke came from me be over zealous with the oil can when I assembled the engine, I always coat everthing inside with two stroke oil, think I got a bit carried away this time! Ran it again yesterday and she is much less smokey. It is still way too rich though I will be picking up a selection of jets next week. You will get a little smoke from most two strokes though.
That exhaust does sound awesome johnu did you design and fabricate it is like to get a set for my titan and really like how they come right under the bike
That exhaust does sound awesome johnu did you design and fabricate it is like to get a set for my titan and really like how they come right under the bike
Somebody did the actual calculations based on the porting and carbs I am using. I did do the design and fabrication. If you run the pipes under the frame of course you can't have a center stand! Other members on here (Clem, Bradj and Walms) are also making or have made there own expansions.
Dave Swarbrick makes pipes that go underneath the frame, which is what i based mine on.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.