Set of (4) K&N 2" ID Pod Filters

1sttimer

1sttimer

Over 1,000 Posts
Got these in a bucket of parts in a trade. Brand new. Only blemish is the ID of one filter. Looks like someone test fit it and didn't use them. Sell for $100 as a set. Yours for $60 shipped.

Here's the website for specs:

http://www.knfilters.com/mobile/mProduct.aspx?prod=RU-1824

47aa217adfe0f6fcc0466ec988d9542c.jpg


04618f8b0de5136eb23cb6057d85c9fa.jpg


760ba273b79eebb1f8e208f3eabbd1c8.jpg



Sent from my iPhone using Tapatalk
 
1sttimer said:
Got these in a bucket of parts in a trade. Brand new. Only blemish is the ID of one filter. Looks like someone test fit it and didn't use them. Sell for $100 as a set. Yours for $60 shipped.

Here's the website for specs:

http://www.knfilters.com/mobile/mProduct.aspx?prod=RU-1824

47aa217adfe0f6fcc0466ec988d9542c.jpg


04618f8b0de5136eb23cb6057d85c9fa.jpg


760ba273b79eebb1f8e208f3eabbd1c8.jpg



Sent from my iPhone using Tapatalk
Click to expand...

Those and a set of these: would be worth a test on the KZ1K... Hmmm.

s-l1600.jpg
 
Those rubber? Might have to use a stainless coupler or something?

Lemme know man. I'm out of town starting wed-Friday so I could get them out tomorrow.

Sent from my iPhone using Tapatalk
 
1sttimer said:
Those rubber? Might have to use a stainless coupler or something?

Lemme know man. I'm out of town starting wed-Friday so I could get them out tomorrow.

Sent from my iPhone using Tapatalk
Click to expand...
Yeah, the velocity stacks from the air box. I would rubber cement them together on a chunk of PVC with a clamp loosely fit, then trim and excess glue off and install with the provided clamps, should be real close to the 50mm OD on the stacks.

Will do need to check the stacks.
 
Re: Set of (4) K&N 2" ID Pod Filters


Tune-A-Fish said:
Yeah, the velocity stacks from the air box. I would rubber cement them together on a chunk of PVC with a clamp loosely fit, then trim and excess glue off and install with the provided clamps, should be real close to the 50mm OD on the stacks.

Will do need to check the stacks.
Click to expand...

10-4 just lemme know.


Sent from my iPhone using Tapatalk
 
Re: Set of (4) K&N 2" ID Pod Filters

I may be interested Let me double check the flange on my carbs. They're very close to 2" but not sure exactly how close.

Later, Doug
 
Re: Set of (4) K&N 2" ID Pod Filters


Streetfighterkz said:
I may be interested Let me double check the flange on my carbs. They're very close to 2" but not sure exactly how close.

Later, Doug
Click to expand...

Cool. If your application is small, these can probably cinch down 1/8" or maybe a little more to fit. Stretching to make them bigger probably not so much.


Sent from my iPhone using Tapatalk
 
Re: Set of (4) K&N 2" ID Pod Filters

Well, my carbs measure 2.165" or 55mm. Looks like the filters won't work. Good luck with your sale.

Later, Doug
 
Re: Set of (4) K&N 2" ID Pod Filters

Sold. Thanks, Tuna.


Sent from my iPhone using Tapatalk
 
Re: Set of (4) K&N 2" ID Pod Filters


Tune-A-Fish said:
Got em thanks


Sent from my iPhone using Tapatalk
Click to expand...

Awesome, appreciate it.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom