Brought this CB450 back from the dead.
Valves adjusted
Fresh oil
Rebuilt the carbs
Reg/rec installed
LED H4 headlight (to draw less power from the system)
Pamco Ignition (had it running on points first)
The left cylinder header wasn’t getting hot at all... After tinkering with the carbs for days and days, finally fired on both cylinders, but when I ride it... The cylinder will start/stop even under throttle load, the cylinder will die and then kick back in intermittently.
Do I take the carb apart AGAIN (possibly tenth time)? What else can I try?
Valves adjusted
Fresh oil
Rebuilt the carbs
Reg/rec installed
LED H4 headlight (to draw less power from the system)
Pamco Ignition (had it running on points first)
The left cylinder header wasn’t getting hot at all... After tinkering with the carbs for days and days, finally fired on both cylinders, but when I ride it... The cylinder will start/stop even under throttle load, the cylinder will die and then kick back in intermittently.
Do I take the carb apart AGAIN (possibly tenth time)? What else can I try?