Single Side Swingarm

J-Rod10

Over 1,000 Posts
DTT BOTM WINNER
$225 + the ride. From a Honda NT650. Is narrow enough to fit in the majority of the CB frames. Have slid it into a 750, 500/550 and a 350F. Would just require spacers to center it. Comes with wheel, swingarm, shock, and the tire has some life left.
2014-10-28%2018.22.04_zpseppwvqbt.png
 
An idea of what you could do with it. I originally bought it for this bike, but ended up going with a 748 setup.

IMG_20141015_092344_zpsyum8vbl6.jpg
 
for what it's worth to someone possibly interested but not a huge fan of the wheel, VFR750/800 rear wheels bolt straight on to the HAWK nt650 hub for this, which matches nicely with just about any honda front wheel from the sportbike range of the late 90s-middle 00's

vfr%20750%20f.jpg


This is a really great part for a fair price too. GLWS!
 
I believe you have to use the eccentric from a 750 to use the 750/800 wheel, as the NT uses a single center nut, and the VFR's use four lugnuts.
 
focusinprogress said:
for what it's worth to someone possibly interested but not a huge fan of the wheel, VFR750/800 rear wheels bolt straight on to the HAWK nt650 hub for this

"Bolts straight on" after a little machine shop work...

http://www.hawkland.de/beatty/VFR_Whl.html
 
DesmoDog said:
"Bolts straight on" after a little machine shop work...

http://www.hawkland.de/beatty/VFR_Whl.html

the guy in the shop next to where I rent space did it, I asked him if what j-rod10 said was how and he said "yep!"

"I believe you have to use the eccentric from a 750 to use the 750/800 wheel, as the NT uses a single center nut, and the VFR's use four lugnuts."
 
Pic of same set-up on a SOHC CB750. The Google pulled up a member of DTT's bike. Give you an idea of the look on a bike.

se6ynu7a_zpsycqn5sya.jpg
 
Back
Top Bottom