new member, Dublin Ohio

So that's where I'm at right now. Still lots to do. I did however take the bobber for a spin to pic up a few supplies lol. Now that I figured out how to attach images here it is. Took about 4 - 5 months.

Sorry all my images seem to be sideways not sure why???

So after talking to wolfeman28 about doing the upholstery for the seat I went ahead and bought all the materials and made a pan. Then the guy stops responding to texts and won't return calls. Basically screwing me. Thanks a lot Eric, you're a real stand up guy.

So I've got the new tires mounted. I went to fill them and realized I broke a valve stem on the rear. Bought new stems and pushed the tire down took out the broken one no problem. Then like an idiot I dropped the new one in the tire. So I got the spoons back out and pulled one side of the tire off retrieved the new stem. Put the tire back on and put the new stem in.

Did something weird to my hand when pulling the stem through. I heard my hand pop and now my middle finger hurts like heck to bend. Plus I woke up this morning with a bulge next to my middle knuckle l.

When I shortened the springs in the forks both hex bolts stripped on me. Great lol! I was hesitant to drill them since they are oil filled and pressurized. I took them all around town today to several garages. One tried with no joy and the others said they could not help. So I took the plunge and drilled them and tapped in an extractor. Took a bit of finger crossing and praying but they came out just fine.