collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: 75' KZ400 Tracker/Enduro: Near Completion  (Read 7269 times)

Offline canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3601
  • 'hacking is learning'
Re: 75' KZ400: 2017 Updates!
« Reply #50 on: May 30, 2017, 12:50:40 »
Very nice work.  I dig the paint.  Can we hear it ?
--

YZF750/1000R The Fly
KZ 750 Twin
ZRX 1100
KZ400 The Rabbit
KLR650, 65 Norton, my never finished shovelhead chopper, an 86' FXR, and an F9 Bighorn
more YZF750R's, more KZ's, a Zephyr750...and the ever unfinished 75' CB550 cafe.
--

Offline AimlessMoto

  • Posts: 156
  • Blood, sweat and beers.
Re: 75' KZ400: 2017 Updates!
« Reply #51 on: May 30, 2017, 21:18:49 »
I shot a few vids... this one has it running and riding half way through with the two under-pipes. Im editing together the next in the series with the high pipe. Should be out in the next week or so.


 


Offline AimlessMoto

  • Posts: 156
  • Blood, sweat and beers.
Re: 75' KZ400 Tracker/Enduro: Near Completion
« Reply #52 on: Jun 01, 2017, 01:27:02 »
I jumped over the last hurdle today.

I had been fighting a "cruising" hesitation/gurgle around 3-4k rpm.

The hesitation was caused by using these needles from a rebuild kit  turns out they were 2mm longer than stock. Put the stock ones in and its 99% better. I think i still may need to down-jet from the 72 mains to 68s. We'll see.

Offline NoRiders

  • Posts: 701
Re: 75' KZ400: 2017 Updates!
« Reply #53 on: Jun 01, 2017, 14:55:14 »
Hahaha, didnt even notice that... let me fix...

....aannnd you've built yerself a sharp bike...really sharp :)

Offline diggerdanh

  • DTT SUPPORTER
  • *
  • Posts: 297
Re: 75' KZ400 Tracker/Enduro: Near Completion
« Reply #54 on: Jun 02, 2017, 11:36:27 »
Agreed. I watched parts 1-5 a couple days back. Nice work. Waiting patiently (kinda) for next episode...

Offline AimlessMoto

  • Posts: 156
  • Blood, sweat and beers.
Re: 75' KZ400 Tracker/Enduro: Near Completion
« Reply #55 on: Jun 03, 2017, 03:58:23 »
New episode is out. Thanks!


Offline AimlessMoto

  • Posts: 156
  • Blood, sweat and beers.
Re: 75' KZ400 Tracker/Enduro: Near Completion
« Reply #56 on: Jun 07, 2017, 21:01:04 »
Headlight has become a problem. Cheap $20 ebay nonsense. The bulb got so hot it warped the plastic lens...  then the vibrations killed both hi and lo beams... bought an LED bulb... and broke the housing to the headlamp trying to install...

Such crap. On the search for a better housing with a glass lens.