CX500 Rear Sets

J-Rod10

Over 1,000 Posts
DTT BOTM WINNER
Working on a few tweaks to my rear sets. They should be wrapped up and available next week. They will be a 100% bolt on and go kit. I've got a brake light switch set up I am finalizing today, and have some stronger return springs on the way. I know the brake light has been a major hang up for the European guys, and those in the States that have inspections. I finally have had a couple days to sit down and sort it out. Price on the new kit is going to be $450. If you have any questions, or are interested in a set, shoot me a message. Kit will include everything to bolt on and ride inside a half hour. Zero modifications required to your bike. Brackets, controls, linkage, brake stay/cable stay, cross bar, and spacers are all billet 6061. The shift linkage set up is steel. Linkage will come with LH/RH heim joints, that you can fine tune the toe peg location without removing anything. Just loosen the jam nuts, and twist the linkage rod. Also includes a new Motion Pro brake cable, and stainless piece the cable fits to in the brake arm on the hub. All fasteners are stainless.

Screenshot_20170404-064054_zpsvbszjcyb.jpg

Screenshot_20170227-091748_zpsyvbyucjg.jpg
 
Much appreciated, Murray.

These will be ready to ship by the end of the week. Just waiting on the springs for the ass end of the cable.

20170501_145258_001_zpsz9kwdgel.jpg

20170501_145312_zps7yxs47yh.jpg

20170501_145322_001_zps90ypflvn.jpg
 
Can't see the photos here but I will try to check out your website. Can we modify these for use with rear disks? Someplace to mount a master cylinder. I would be interested in that.
 
Back
Top Bottom