Hi
I installed (or at least tried) to install the m flash from motogadget as per the instructions in the attached picture, for a CB 750K2: m flash 12v wire with bike 12v and then ground with ground but I did it wrongly. Instead I hooked bike black wire with m flash black wire and motorcycle gray wire (turn signal main - going to flash relay) with m flash red wire then....boom! No more lights, no more electrical start at all in the bike even when I removed the m flah and went back to my original wiring scheme with my old flasher. Any thoughts on what happened ? (i changed the fuse), but now it's a total black out ! Engine turns over though, i can hear it, but go no ignition at all and no lights at all.
I installed (or at least tried) to install the m flash from motogadget as per the instructions in the attached picture, for a CB 750K2: m flash 12v wire with bike 12v and then ground with ground but I did it wrongly. Instead I hooked bike black wire with m flash black wire and motorcycle gray wire (turn signal main - going to flash relay) with m flash red wire then....boom! No more lights, no more electrical start at all in the bike even when I removed the m flah and went back to my original wiring scheme with my old flasher. Any thoughts on what happened ? (i changed the fuse), but now it's a total black out ! Engine turns over though, i can hear it, but go no ignition at all and no lights at all.