Hello all,
I'm a CX500E owner looking to upgrade my forks; the handlebar mounts on the CX are shaped into the top clamp which is fugly when you go for clipons and a bit fatter fork legs will be a bonus too. USD forks are pretty, but waaaaay out of my budget.
I'm trying to figure out whether a VF1000F front-end will work. I already know the front axle diameters (15mm), steering head bearings (26x47x15/30x55x17) and the brake disc diameters (296mm) are the same, and what I'm now trying to figure out is the distance between the front rotors, measured either on the outsides or between the discs and the distance between the fork legs (center to center). I've been Googling my ass off but can't seem to find the info.
I hope someone can help me out!
I'm a CX500E owner looking to upgrade my forks; the handlebar mounts on the CX are shaped into the top clamp which is fugly when you go for clipons and a bit fatter fork legs will be a bonus too. USD forks are pretty, but waaaaay out of my budget.
I'm trying to figure out whether a VF1000F front-end will work. I already know the front axle diameters (15mm), steering head bearings (26x47x15/30x55x17) and the brake disc diameters (296mm) are the same, and what I'm now trying to figure out is the distance between the front rotors, measured either on the outsides or between the discs and the distance between the fork legs (center to center). I've been Googling my ass off but can't seem to find the info.
I hope someone can help me out!
