Nebr_Rex
Coast to Coast
Thought I'd post up my latest project(s).
My pair of KZ400's.
First pic is of the Dr. Jekyll bike. Plans are to keep this one basically stock
except for the 440 with a milled head, round slide carbs,440 forks (flipped caliper).
Second pic is of the second go around for this bike.
It was first built a couple of years ago with the engine that's now in the other bike.
It was has 36mm forks, KZ550 swing arm, dual disk brakes and 2.15(wm3?) rear rim.
(120 rear/100 front)
Still have to reinstall the quarter fairing,seat, rear sets, aluminum
fenders and non stock gauges.
Need to modify the upper shock mounts and redo the tail.
Over on the KZ400 site someone claimed to make 55 h.p. with a bored out 440.
I think I can do better then that, stock being 40h.p. at the crank.
I've already acquired some n.o.s. Wiseco pistons to use.
Going to back cut the transmission also.
My pair of KZ400's.
First pic is of the Dr. Jekyll bike. Plans are to keep this one basically stock
except for the 440 with a milled head, round slide carbs,440 forks (flipped caliper).
Second pic is of the second go around for this bike.
It was first built a couple of years ago with the engine that's now in the other bike.
It was has 36mm forks, KZ550 swing arm, dual disk brakes and 2.15(wm3?) rear rim.
(120 rear/100 front)
Still have to reinstall the quarter fairing,seat, rear sets, aluminum
fenders and non stock gauges.
Need to modify the upper shock mounts and redo the tail.
Over on the KZ400 site someone claimed to make 55 h.p. with a bored out 440.
I think I can do better then that, stock being 40h.p. at the crank.
I've already acquired some n.o.s. Wiseco pistons to use.
Going to back cut the transmission also.