collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com

Shout Box

Pages: 1 2 [3] 4 5
  • advCo:
  • Nice
  • Nov 16, 2018, 13:06:25
  • Kamn:
  • not my bike
  • Nov 16, 2018, 12:56:59
  • Kamn:
  • this one  [link]
  • Nov 16, 2018, 12:56:39
  • advCo:
  • What bike you working on?
  • Nov 16, 2018, 12:55:24
  • Kamn:
  • 3rd times a charm
  • Nov 16, 2018, 12:53:54
  • Kamn:
  • cheap china parts suck donkey dick, I've already replaced it with 2 others that didn't work from the get go
  • Nov 16, 2018, 12:53:37
  • Kamn:
  • I was hoping to get a mail delivery today of a coil module for an Ignition upgrade to a CX (hall effect ignition) because 1 of the 2 that came with it shit the bed just after firing it up, this bike has been sitting here since end of Aug. I want this thing gone from here
  • Nov 16, 2018, 12:52:12
  • advCo:
  • Guy is asking $250 for it. I'll sell my HF 2.5 hp 21 gal for $100 and be doing pretty well
  • Nov 16, 2018, 12:49:25
  • advCo:
  • Yeah thats mostly what I'll use it for, some occasional paint work and air tools
  • Nov 16, 2018, 12:46:15
  • Kamn:
  • you'll enjoy the capacity
  • Nov 16, 2018, 12:44:50
  • Kamn:
  • I picked one up a few years ago for $150 but the pump was shit, swapped in a twin cylinder from HF and man does it ever fill up fast, good for blasting
  • Nov 16, 2018, 12:43:21
  • advCo:
  • Slow as hell at work, hoping to leave early this afternoon to go pick up the new to me 60 gal compressor
  • Nov 16, 2018, 12:41:47
  • Kamn:
  • hows your morning going so far advCo?
  • Nov 16, 2018, 12:41:05
  • advCo:
  • Morning Kamn
  • Nov 16, 2018, 12:40:34
  • advCo:
  • Yep. I did that with mine. The brake lines went, fuel lines were next, needed a clutch so I traded it in on a 2011
  • Nov 16, 2018, 12:39:14
  • Kamn:
  • Morning Gents, get all the lines replaced with galvanized lines.
  • Nov 16, 2018, 12:38:11
  • Hurco550:
  • im thinking about fixing this brake line and trying to get something newer again. I'm afraid this thing is getting really close to nickle and dime to death territory, and i need something i can jump in and drive to georgia at any time
  • Nov 16, 2018, 12:37:48
  • advCo:
  • Yep. Check your fuel lines, too. My dad just had to do all the brake lines and fuel lines in my sister's '00 Accord
  • Nov 16, 2018, 12:36:14
  • Hurco550:
  • The auto tec program here at the school is replacing the leaky one, but it wont be long until they all go. It seems like when one goes, the rest arent far behind
  • Nov 16, 2018, 12:31:19
  • Hurco550:
  • i dont think so. Ill pay someone to do it. Freezing rain in the forcast for the next 2 weeks and i dont have a shop to do the brake lines in.
  • Nov 16, 2018, 12:29:36
  • canyoncarver:
  • I have to use a kerosene blast heater in winter.
  • Nov 16, 2018, 12:24:38
  • advCo:
  • Gotta love that salt. You going to do lines yourself?
  • Nov 16, 2018, 12:10:44
  • advCo:
  • Sounds about right
  • Nov 16, 2018, 12:10:26
  • Hurco550:
  • mine is an 01.
  • Nov 16, 2018, 12:04:41
  • advCo:
  • Found a shop to do it on the spot, waited there 3 hours, then got on the road and almost immediately blew a tire on the concrete mixer I was towing LOL
  • Nov 16, 2018, 12:01:07
  • advCo:
  • My '03 popped a brake line on the highway  when I was driving from CT to MA. That was fun
  • Nov 16, 2018, 12:00:34
  • advCo:
  • What year is your truck?
  • Nov 16, 2018, 12:00:03
  • Hurco550:
  • i've always been a chevy guy, but why in the hell they used steel brake lines that rusted out not even half way through the service life of the truck is beyond me.
  • Nov 16, 2018, 11:44:39
  • Maritime:
  • Yep, have to open a window every so often to keep from passing out;
  • Nov 16, 2018, 11:21:26
  • advCo:
  • Lol yeah. We used to run one in the garage at my rent's place when my dad and I were restoring the Beetle
  • Nov 16, 2018, 11:20:48
  • Maritime:
  • Until there is no air left
  • Nov 16, 2018, 11:20:09
  • advCo:
  • My shop has an open ridge vent so any heat just goes straight up and out
  • Nov 16, 2018, 11:20:03
  • advCo:
  • Yeah those propane heaters do pretty well
  • Nov 16, 2018, 11:19:48
  • Maritime:
  • I'd like to insulate but that would reduce the space too much, I have the heated basement shop for bikes but can't work on cars there so I just blast the propane to get the chill off and go in the car side
  • Nov 16, 2018, 11:16:18
  • advCo:
  • Yeah I'll have to make room for it. I'm fixin to pull everything out of the shop probably later this winter and insulate and sheetrock the shop
  • Nov 16, 2018, 11:14:54
  • Maritime:
  • I'd throw a wood burner in the garage here if I had space, but I don't
  • Nov 16, 2018, 11:13:13
  • Maritime:
  • Nice
  • Nov 16, 2018, 11:12:26
  • advCo:
  • Cool, guy here at work wants to trade an old wood burning stove for some fiberglass work on his boat
  • Nov 16, 2018, 11:08:27
  • Maritime:
  • Ha, yep, you should be able to clean the rust out of the drums and re-use. Good luck
  • Nov 16, 2018, 10:23:24
  • advCo:
  • I gave up around 8:00 I'll give it another go tomorrow. It came off about 1/4-3/8" so I may be able to get a big 3 jaw puller behind the drum and try that. I want to reuse the drums otherwise I'd just beat the hell out of it with a BFH
  • Nov 16, 2018, 10:06:50
  • advCo:
  • Yeah, I think the shoes are rusted to the drums. The driver's side, the liners just came off the shoes so it popped off easy
  • Nov 16, 2018, 10:02:51
  • advCo:
  • Ha yeah that will happen.
  • Nov 16, 2018, 10:02:14
  • Maritime:
  • I wrecked my old heater using it while painting. The thing sucked the overspray in and it plugged it all up and now it won't light or burn right, need to remember not to do that with the new one.
  • Nov 16, 2018, 09:54:27
  • Maritime:
  • Shitty. Rust?
  • Nov 16, 2018, 09:53:14
  • advCo:
  • I spent 2 hours trying to pull the pass side rear drum off the bus last night. Driver's side came off by hand. Had to modify my hub puller but even that wouldn't pull it
  • Nov 16, 2018, 09:52:52
  • advCo:
  • Sweeeet.
  • Nov 16, 2018, 09:52:11
  • Maritime:
  • Woot. heaters on sale at CT to replace my buggered one. Grabbing one on the way home. $15 less than HF. Just in time for me to use to swap all the suspension on the Yaris and the front struts on the CRV
  • Nov 16, 2018, 09:10:29
  • irk miller:
  • 350GP Vintage Cup [link]
  • Nov 15, 2018, 20:15:53
  • advCo:
  • later
  • Nov 15, 2018, 18:33:11
  • Nj732port:
  • cya kamn be safe milkin that farmer
  • Nov 15, 2018, 18:20:11
Pages: 1 2 [3] 4 5