I wanted to build my own bike.... I owned a Yamaha xs 750 20 years ago and loved the bike so I found a basket case triple and decided to try to breathe new life into it, as best I could. As I searched through other's projects... I saw a lot of chopped bikes... a lot of cafe racers... and a lot of bobbers. I wanted to do something a little different.... so I settled on the idea of a stretched low rider with an almost completely new frame, tank, and body parts. Since no one made the parts I wanted... I knew I would have to fabricate almost every piece by hand. My hope in posting here is to get advice from other triple fans and glean as much knowledge as I can from those here with much more experience than me. I officially began the project February 21, 2018. The first three pictures show where the bike is as of today, May 6, 2018. There are still a few things for me to do, but I am very close to fiberglass and paint and am looking forward to finishing the details I can wire it all up and take it for a test ride.. As you can see in the 4th and 5th pictures... I inherited a true basket case. A cut up frame... and basically three boxes filled with varying parts.