DO THE TON

Turn your Brain Off and Shoot the Shit => Loungin at da club => Vintage Jackets and Helmets etc. => Topic started by: jmhauck88 on Mar 13, 2013, 22:47:24

Title: loose bubble shield?
Post by: jmhauck88 on Mar 13, 2013, 22:47:24
Anyone's bubble shield come loose? Mine has and I'm not sure if there is a good way to fix it. Any help would be appreciated!
Title: Re: loose bubble shield?
Post by: Rich Ard on Mar 13, 2013, 22:57:35
Button it back on.
Title: Re: loose bubble shield?
Post by: chillinfellow on Mar 14, 2013, 11:48:56
I use one, never a issue, usually a very slight amount of play from the snap button alignment slots, not sure why it would be so loose unless a button broke or its not snapped on properly ? maybe remove it and snap it back on ?
Title: Re: loose bubble shield?
Post by: VonYinzer on Mar 14, 2013, 12:31:07
Best way to fix it? Set it on your workbench or desk next to your laptop. Go to your favorite parts supply website. Order this (or something similar):

(http://i727.photobucket.com/albums/ww276/VonYinzer/HJC-CSR2-BLK.jpg)

Done.


;)
Title: Re: loose bubble shield?
Post by: brandonpx on May 03, 2013, 18:44:05
you can take a punch and hammer the center of each snap on the bubble shields snap rivets, will usually tighten it back down. mine does the same thing occasionally.