DO THE TON

Blood Sweat Tears and Grease => Projects => Enduro / Dirt / Scramblers => Topic started by: ncologerojr on Mar 04, 2017, 10:00:32

Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:00:32
The backstory:

 After the completion of my last CB350 "UpstateScrambler" (http://www.dotheton.com/forum/index.php?topic=68584), I was really fortunate to have it featured on several online publications. Following the features I began receiving daily email inquiries from people looking for their own. At first, I didn't want to build another scrambler. But, after some thinking, I decided that I would build three at the same time, and to my overall design specs. I sacrificed some of my own ideas to please the customer on my last build, and I didn't want to do that here. I would carry over the ideas that worked well on the last build, and re-design the things that didn't. I put the offer out there, and I had three new customers. (You can see the build offer on my website). Unfortunately, one customer had to back out. So I decided that two might just be a better idea anyways.

I managed to find these '70 and '71 CB350's to fit the bill.
 
(https://uploads.tapatalk-cdn.com/20170313/ce103ea00033d06249c950e0a40ce9bd.jpg)
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:08:32
The goal is to build the two bikes mechanically the same, but aesthetically different.

I started off refinishing some parts. Black powder coat and hand-polished.

(https://uploads.tapatalk-cdn.com/20170313/cc373ccddddb2a0fc51c4200c94159ed.jpg)

(https://uploads.tapatalk-cdn.com/20170313/5f858efda4f767457af6720f5a34bd55.jpg)

Wheels were re-laced and received fresh bearings and brake shoes.

(https://uploads.tapatalk-cdn.com/20170313/1cc0aa7134954fe42a7a0621aa7f4a2a.jpg)

(https://uploads.tapatalk-cdn.com/20170313/68d8087b5d91bf4bef4227fc8e7e7eca.jpg)

(https://uploads.tapatalk-cdn.com/20170313/d0ff4a28d9c693d888351da8b128ab41.jpg)
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:10:27
Forks were rebuilt with fresh seals

(https://uploads.tapatalk-cdn.com/20170313/2ac7121f82f635d106f07b73c94a3ccd.jpg)
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:12:37
Next I knocked out some rear hoops to fit recessed LED tail lights.

(https://uploads.tapatalk-cdn.com/20170313/1bce950465d1456d899dfa97b9c2d107.jpg)

(https://uploads.tapatalk-cdn.com/20170313/7896df39ba5b003daf91c99b794c4634.jpg)
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:14:36
Next up were subframes and shock mounts.

(https://uploads.tapatalk-cdn.com/20170313/0ddb16b6d42677231bab40520bac60ee.jpg)
(https://uploads.tapatalk-cdn.com/20170313/f84eef09b8a27a31c80909f3522930f3.jpg)
(https://uploads.tapatalk-cdn.com/20170313/8905020785d20c9a685506fafe492075.jpg)
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:32:22
After that I turned my attention to the tanks. My original plan was a basic shaped steel tank like the UpstateScrambler.

(https://uploads.tapatalk-cdn.com/20170313/8b2b5e89fb1c10525f5cc796234691e7.jpg)
(https://uploads.tapatalk-cdn.com/20170313/40fb47b8519560500696ef32c6380556.jpg)

But, then I decided that aluminum tanks with good rubber mounts would be a better product in the end. I decided to use thick .090" aluminum for durability, and add some knee dents for style. I used the same patterns, but no buck or gauges so each tank would be a little different.

(https://uploads.tapatalk-cdn.com/20170313/66e7c56825040167e52a74e374731168.jpg)

(https://uploads.tapatalk-cdn.com/20170313/107c844e94ff9d03993ed132b424605a.jpg)

(https://uploads.tapatalk-cdn.com/20170313/61dd9a9c3e34f6e57cc900fd8e7e9db8.jpg)

(https://uploads.tapatalk-cdn.com/20170313/6541540b3c84f41ad5a075f33e78d148.jpg)

(https://uploads.tapatalk-cdn.com/20170313/04585ba1acdf313936038f2206a0d1fb.jpg)

Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 10:33:55
This is how they are sitting today.

(https://uploads.tapatalk-cdn.com/20170313/0402898df27d6404be55b9a65aaa58b6.jpg)

(https://uploads.tapatalk-cdn.com/20170313/94ff3850aacca0e06824fd951c99bf53.jpg)

(https://uploads.tapatalk-cdn.com/20170313/f125ab655f8b16b4ea88c17148dcc29c.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Mar 04, 2017, 10:57:38
Two thumbs up!


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 04, 2017, 18:16:25
Two thumbs up!


Sent from my iPhone using Tapatalk

Thanks!
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 05, 2017, 10:44:23
I thought I'd share some plans for the bikes.

-Aluminum front fenders with heavy mounts for bracing.
-Aluminum side panels with indents for uni filters.
-Aluminum scrambler style seat pans.
-Custom 2-1 exhausts. One raw stainless/one black ceramic coated.
-Battery box and splash guards.
-New custom wire harnesses.
-Stainless headlight mounts.

Keep an eye out for a lot of progress on these over the next few weeks.

(https://uploads.tapatalk-cdn.com/20170313/460e2332d0232ee48afb45ecf775a28d.jpg)
(https://uploads.tapatalk-cdn.com/20170313/8f0724a2f6b55f4f39e9accd64d896c6.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Mar 05, 2017, 18:33:35
Watching with interest, as I'm building a 72 CB350 for my wife, sorta along the flavor of the Fox CB350, but without the ridiculous extended swing arm. Particularly interested in seeing how your 2-1 exhaust comes out, as I plan to build my own out of SS.


Sent from my iPhone using Tapatalk
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 05, 2017, 19:38:18
Watching with interest, as I'm building a 72 CB350 for my wife, sorta along the flavor of the Fox CB350, but without the ridiculous extended swing arm. Particularly interested in seeing how your 2-1 exhaust comes out, as I plan to build my own out of SS.


Sent from my iPhone using Tapatalk

Awesome. If you check out my last build thread for the "UpstateScrambler" cb350 there are some pics of the exhaust build. That design worked well so I'm carrying it over to these two.

(https://uploads.tapatalk-cdn.com/20170305/9345bdd13dcfba0d4394b909cfd615ce.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: Bootsey on Mar 07, 2017, 17:11:19
Impressive work as always, I'm in.
Title: Re: CB350 Scrambler Siblings
Post by: JustinLonghorn on Mar 08, 2017, 09:49:02
I dig the dual build, man. I'm on board.
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Mar 08, 2017, 12:06:28
Is that a Cone Engineering 2-1 collector? And may I ask what size tubing that is?


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 09, 2017, 07:25:00
I dig the dual build, man. I'm on board.
Impressive work as always, I'm in.

Thanks guys! It's pretty cool building the pair.
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 09, 2017, 07:26:13
Is that a Cone Engineering 2-1 collector? And may I ask what size tubing that is?


Sent from my iPhone using Tapatalk

Yes, all cone engineering tube and collector. I made the weld on collector into a slip-on. 1.5" tubing.

I'm going to be offering these cb350 exhausts for sale in the next couple months if you're interested...
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 09, 2017, 07:34:33
Got both tanks capped and tunneled. Just need to weld in the mounting and petcock bungs, then it's onto pressure testing.

(https://uploads.tapatalk-cdn.com/20170313/c8281375e386ab3054cf2e9acaae8ab2.jpg)

(https://uploads.tapatalk-cdn.com/20170313/b9c02d92899362cdba19a9c983fdcd16.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Mar 09, 2017, 07:50:31
Those tanks are amazing!


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 09, 2017, 08:23:19
Those tanks are amazing!


Thanks man. They're a lot of work, but I enjoy making them.
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 09, 2017, 19:57:40
I forgot to pick up the rubber grommets needed to make the tank mounts today, so I started on the side panels. I roughed in one to check the figment, and I'm really happy with it. I think they're going to look great. I threw on a velocity stack to check the clearances, I'll be running uni filters on the completed bike.

(https://uploads.tapatalk-cdn.com/20170313/fbc985be741cf7ae8ede7ad580d79641.jpg)

(https://uploads.tapatalk-cdn.com/20170313/67c1ce77a882ae51fbc368020e4208f3.jpg)

(https://uploads.tapatalk-cdn.com/20170313/d1e10325ff8aa5b971cf450475d3331d.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 13, 2017, 20:37:50
I hammered out the other three side panels today. I'm really liking these.

(https://uploads.tapatalk-cdn.com/20170313/7f61ab4a1088ed96e4f2b5d1a695e3d9.jpg)

(https://uploads.tapatalk-cdn.com/20170313/bd9d6444a73d50c418867f0e25150cf8.jpg)

(https://uploads.tapatalk-cdn.com/20170313/c341915e806b2b6f2277164e12cb4f56.jpg)

(https://uploads.tapatalk-cdn.com/20170313/614f5925f004573a229824469861962f.jpg)

(https://uploads.tapatalk-cdn.com/20170313/c454c84414a2f35665f12a5bf2550f43.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 17, 2017, 12:39:30
Backbones seam welded and front tank mounts in place.

(https://uploads.tapatalk-cdn.com/20170317/9429cc9c85765cc7fcd250d0be1653f8.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Mar 17, 2017, 14:07:12
Was that backbone weld to clear your tank or  just wanted something stronger than the factory spot welds?


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 17, 2017, 14:10:59
Was that backbone weld to clear your tank or  just wanted something stronger than the factory spot welds?


Sent from my iPhone using Tapatalk

  For both purposes really. It allows me to use a more shallow tunnel in the tank which increases fuel capacity, and it strengthens the backbone. So a win-win as I see it.
Title: Re: CB350 Scrambler Siblings
Post by: canyoncarver on Mar 17, 2017, 16:25:41
I always dig your metal work.  Neat dual build !
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 17, 2017, 19:48:18
I always dig your metal work.  Neat dual build !


Thanks man!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 21, 2017, 20:19:38
The rear rubber mounts for the tanks are done, and now on to the seat pans.

(https://uploads.tapatalk-cdn.com/20170321/fcf4e109c64a7e4f366717de52ffb2f5.jpg)

(https://uploads.tapatalk-cdn.com/20170321/a2484b79d171118cd8c7830052f15d8e.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 23, 2017, 18:47:05
The transition pieces for the set pan are shaped and welded on. There are tabs on the underside that support the transitions and provide weld areas. These pieces allow the seat to clear the rear tank mounts, and provide a sturdy edge for the seat upholstery that will contour to the tank. They actually too a good amount of work, and will be covered in foam and leather, never to be seen again.

(https://uploads.tapatalk-cdn.com/20170323/934eafa581bbb8ef082abeb8bc9f142e.jpg)

(https://uploads.tapatalk-cdn.com/20170323/b15837abcca31accb4c6e20b8519da05.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 28, 2017, 23:44:32
Before going any further with the seat I wanted to get the side panels mounted. The battery will be mounted below the seat so I decided to make the right side panel removable. I machined some aluminum bullets to hold grommets on the right side panels allowing them to pop off like the stock side covers.

(https://uploads.tapatalk-cdn.com/20170329/e81a18a0b9bbe773f4a0ba0013f3531f.jpg)

(https://uploads.tapatalk-cdn.com/20170329/e98eee5af8ec5d7cdedc4952e2a9f853.jpg)

(https://uploads.tapatalk-cdn.com/20170329/f9d738b28345c6b145487df27bf39a54.jpg)

Next I got started on the battery boxes from 16ga steel. I'll mount these up tomorrow.

(https://uploads.tapatalk-cdn.com/20170329/ee6751992a711f27e77adb4e3260b4f8.jpg)

(https://uploads.tapatalk-cdn.com/20170329/6d247f69289080e2993d23b36113f73f.jpg)

Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Mar 29, 2017, 05:37:51
How do those 350s run with your 1.5" exhaust? The stock pipes vary from 1 to 1.125" ID, depending where you measure, so you've increased the exhaust size by almost 50%. Obviously they have to be jetted way up, but I would think that the bottom end torque would take a big hit. I know these two aren't running yet, but I've seen your other 350 build, and assume you're going to use the same pipes.


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 29, 2017, 09:22:29
How do those 350s run with your 1.5" exhaust? The stock pipes vary from 1 to 1.125" ID, depending where you measure, so you've increased the exhaust size by almost 50%. Obviously they have to be jetted way up, but I would think that the bottom end torque would take a big hit. I know these two aren't running yet, but I've seen your other 350 build, and assume you're going to use the same pipes.


Sent from my iPhone using Tapatalk

The bike ran great, but took some time to get dialed in. These, and the kits I plan on selling are going to get 1.25" tubing.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Mar 29, 2017, 22:23:48
Battery boxes installed.

(https://uploads.tapatalk-cdn.com/20170330/967e36ba76c5699c6aa65dda7a80915a.jpg)

(https://uploads.tapatalk-cdn.com/20170330/fad8e8292f8860a71f4c1cf3e2229738.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 01, 2017, 09:13:33
Pressure testing before paint.
(https://uploads.tapatalk-cdn.com/20170401/4cd4db4aa0e7acf4b0a9125f529d5bfd.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 02, 2017, 16:31:12
Hammering out fenders today.

(https://uploads.tapatalk-cdn.com/20170402/a2595edabb865ac5a72d36d52e7bb144.jpg)

(https://uploads.tapatalk-cdn.com/20170402/23e5320865a927e04f68ab8f82e987b2.jpg)

(https://uploads.tapatalk-cdn.com/20170402/17442ff09a76fba58d85c076578c77c1.jpg)

(https://uploads.tapatalk-cdn.com/20170402/4e274713956d2cf10ebc34af76ad417d.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 02, 2017, 18:20:58
Two fenders and the tools used to make them. Only tool not pictured is the e-wheel.

(https://uploads.tapatalk-cdn.com/20170402/df786d79e5e6920224db9de3bd9e7224.jpg)

(https://uploads.tapatalk-cdn.com/20170402/8ecb4c37836eaf21e322e9f6bc54cc07.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: advCo on Apr 02, 2017, 19:41:30
Always enjoy watching your metal work. Great job so far on these.

I need to make a couple fenders for a project I got going on, I was going to attempt roughly hammering them out with just the nylon mallet, sure I'll need to do a lot of filling. This might be the motivation I need.


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Apr 02, 2017, 20:19:46
That's awesome! I have that same Mossy Oak mug, love it. I TIG welded a handle onto it.


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Apr 02, 2017, 20:21:00
Did you make that spoon out of a lawnmower blade?


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 02, 2017, 20:36:42
Always enjoy watching your metal work. Great job so far on these.

I need to make a couple fenders for a project I got going on, I was going to attempt roughly hammering them out with just the nylon mallet, sure I'll need to do a lot of filling. This might be the motivation I need.


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)

Get at it! I can get this same result without the e-wheel by planishing with the slapper and dolly. Just takes a little longer. I make my slapper's the old fashion way from a leaf spring. $30 at tractor supply gets you a trailer spring with enough leaves for several slappers. A nice egg dolly is about $45. For $75 you can make a lot of parts.

Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 02, 2017, 20:38:11
Did you make that spoon out of a lawnmower blade?


Sent from my iPhone using Tapatalk
That's awesome! I have that same Mossy Oak mug, love it. I TIG welded a handle onto it.


Sent from my iPhone using Tapatalk

This mug is a Yeti, probably the same as the mossy oak. It's my most valued tool.

I make my slappers from leaf springs like the old-timers did.
Title: Re: CB350 Scrambler Siblings
Post by: advCo on Apr 02, 2017, 20:47:15
Get at it! I can get this same result without the e-wheel by planishing with the slapper and dolly. Just takes a little longer. I make my slapper's the old fashion way from a leaf spring. $30 at tractor supply gets you a trailer spring with enough leaves for several slappers. A nice egg dolly is about $45. For $75 you can make a lot of parts.

Cool. That's not bad at all. Got any pics of your setup?
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 02, 2017, 21:05:55
Cool. That's not bad at all. Got any pics of your setup?

 Do you mean my shop set-up? Not really. There's not too much to see. You can see most of it in the background of the pics in this thread.
Title: Re: CB350 Scrambler Siblings
Post by: johnu on Apr 03, 2017, 20:56:26
This mug is a Yeti, probably the same as the mossy oak. It's my most valued tool.

I make my slappers from leaf springs like the old-timers did.

I make pry bars out of leaf springs too.  I am so mad I lost my original leaf spring pry bar about 3 months ago, I made it when I was about 15 with my dad >:(.
Awesome work here, love the fab stuff, it's my favorite thing to do albeit not up to you level.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 04, 2017, 07:29:05
I make pry bars out of leaf springs too.  I am so mad I lost my original leaf spring pry bar about 3 months ago, I made it when I was about 15 with my dad >:(.
Awesome work here, love the fab stuff, it's my favorite thing to do albeit not up to you level.

 Thanks man. It's all about practice.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 04, 2017, 07:30:40
I got started on the front fender mounts yesterday. Still a lot of work left.

(https://uploads.tapatalk-cdn.com/20170404/c631dbea20ef8bcc14c3c6065c460bd0.jpg)

(https://uploads.tapatalk-cdn.com/20170404/b3a78bc66796ba39da1aca89edebc481.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 05, 2017, 22:10:19
Fenders mounted up.

(https://uploads.tapatalk-cdn.com/20170406/31bf2c84592bc9afbe6dfcfdf7fb54c0.jpg)
(https://uploads.tapatalk-cdn.com/20170406/ba5593764e10a8e987d1b92eea3ff946.jpg)
(https://uploads.tapatalk-cdn.com/20170406/a1c2157d0ef6402fa2c70d57ac80ab57.jpg)
(https://uploads.tapatalk-cdn.com/20170406/7cb9ecedac5f95e1ceba6bc8682e5a35.jpg)
(https://uploads.tapatalk-cdn.com/20170406/03f68977a7908d8b2e00a83ee0acca50.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 05, 2017, 22:19:35
Parts going off to paint in the morning. I'm still a hack when it comes to building bikes, but it always feels good looking at a table full of my own handmade parts.

(https://uploads.tapatalk-cdn.com/20170406/0898e1e4691b75217b96429c53fb9868.jpg)

Title: Re: CB350 Scrambler Siblings
Post by: johnu on Apr 05, 2017, 23:04:58
Parts going off to paint in the morning. I'm still a hack when it comes to building bikes, but it always feels good looking at a table full of my own handmade parts.

(https://uploads.tapatalk-cdn.com/20170406/0898e1e4691b75217b96429c53fb9868.jpg)



Paint :o  Why not polish one then do the scotchbrite finish on the other one?  You are going to cover up all that excellent craftsmanship ???
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 06, 2017, 07:57:18
Paint :o  Why not polish one then do the scotchbrite finish on the other one?  You are going to cover up all that excellent craftsmanship ???

  It's always bitter sweet. Paint actually shows off shapes better than polishing. But, only I'll know that the body man gets to take it easy on my parts.
Title: Re: CB350 Scrambler Siblings
Post by: CrabsAndCylinders on Apr 06, 2017, 16:34:27
Subscribed!
Title: Re: CB350 Scrambler Siblings
Post by: spotty on Apr 06, 2017, 21:33:28
I'm still a hack when it comes to building bikes,

sir, as the appointed representative of the local bodgers and hackers association, I must take exception to your above statement. until you see fit to make badly shaped bits of crap out of old street signs and traffic light shrouds, please refrain form calling yourself a hack. please refer to yourself as a craftsman for you are surely of that despised guild that us lot can only aspire to

lovely work. do you fancy a holiday in Australia to do a bit of your sort of hacking on my (hopefully soon) future 750/4 scrambler? unpaid of course, as you clearly only do this sort of thing as a labour of love
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 06, 2017, 21:45:10
Subscribed!

Thanks for following!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 06, 2017, 21:53:33
sir, as the appointed representative of the local bodgers and hackers association, I must take exception to your above statement. until you see fit to make badly shaped bits of crap out of old street signs and traffic light shrouds, please refrain form calling yourself a hack. please refer to yourself as a craftsman for you are surely of that despised guild that us lot can only aspire to

lovely work. do you fancy a holiday in Australia to do a bit of your sort of hacking on my (hopefully soon) future 750/4 scrambler? unpaid of course, as you clearly only do this sort of thing as a labour of love

 Well, thank you. But, compared to the craftsmen that I look up to, I am just a hack. Take a look at Ryan's work at R.A.W. Body Design and Fabrication. He's on your side of the pond near Melbourne. Ryan is a real craftsman and a hell of a nice guy. He has a lot of stuff up on Facebook.
  I get some money for my bikes, but not much at all. The sales just allow me to keep building. It is still very much a labor of love.
  I would fancy a holiday in Australia though!
Title: Re: CB350 Scrambler Siblings
Post by: spotty on Apr 07, 2017, 00:13:12
that's some spectacular work he's doing there
he's actually only a few miles from my place, I live up in the hills outside Melbourne in a tiny place called Kalorama, we're both hillbillies it seems. I shall have to chase up a visit next time i'm out that way
being up in the hills is one of the reasons I want to build the worlds 2nd biggest trailbike (I've seen a CB900 in full enduro trim a long time ago), we're a bit bushfire prone up there and I might need it to get the hell out straight down the side of the hill one day. another reason is mrs spotty won't let me buy any more bikes so I gotta go with what I've got and the Vmax just isn't a candidate for the dirt
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 07, 2017, 10:17:16

that's some spectacular work he's doing there
he's actually only a few miles from my place, I live up in the hills outside Melbourne in a tiny place called Kalorama, we're both hillbillies it seems. I shall have to chase up a visit next time i'm out that way
being up in the hills is one of the reasons I want to build the worlds 2nd biggest trailbike (I've seen a CB900 in full enduro trim a long time ago), we're a bit bushfire prone up there and I might need it to get the hell out straight down the side of the hill one day. another reason is mrs spotty won't let me buy any more bikes so I gotta go with what I've got and the Vmax just isn't a candidate for the dirt

Yeah, Ryan is a real master. I chat with him from time to time. He's a super nice guy and is always willing to let me pick his brain.

That 750 trail bike is going to be a challenge. Is it Sohc or a dohc model? I would say that the front suspension will be the biggest hurdle. Try finding a beefy and longer than stock front end. You'll want to increase your ground clearance while also increasing, or at least maintaining, the stock trail numbers once you extend the rear shocks. Everything else should be pretty easy.
Title: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 07, 2017, 16:44:43
A couple videos From the past week.

https://youtu.be/YA7XrlyntD4 (https://youtu.be/YA7XrlyntD4)

https://youtu.be/eXDhDtGX0AQ (https://youtu.be/eXDhDtGX0AQ)
Title: Re: CB350 Scrambler Siblings
Post by: jones562 on Apr 07, 2017, 18:33:07
What tires are those.  Build looks great!

Sent from my SM-N920T using DO THE TON mobile app (http://'https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=89466')

Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 08, 2017, 13:52:39
What tires are those.  Build looks great!

Sent from my SM-N920T using DO THE TON mobile app (http://'https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=89466')

Thanks. They are Shinko's. I don't remember the model off the top of my head. But they are the same as I used on my last cb350 build, and I believe I listed the model in that build thread.
Title: Re: CB350 Scrambler Siblings
Post by: dannywrx88 on Apr 09, 2017, 08:16:18
This gives me the James may "fizz" if my build turns out half as good as this I'll b wrapped


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 09, 2017, 08:35:09
This gives me the James may "fizz" if my build turns out half as good as this I'll b wrapped

Haha thanks man.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 09, 2017, 16:45:29
Seat pans are ready for foam and upholstery. Time to tear down the bikes to finish weld the frames and freshen up the engines.

(https://uploads.tapatalk-cdn.com/20170409/de06c1ad7ec2be30ea63c03f7dfe87a0.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 10, 2017, 16:23:10
Making sure that everything is straight and level for finish welding.

(https://uploads.tapatalk-cdn.com/20170410/e2d3f1f3fb6ec7fa82dc15b078e16363.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 13, 2017, 21:30:00
Finish welded frames today.

(https://uploads.tapatalk-cdn.com/20170414/69b7a29af596bb8b2eb12084f180a29a.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: CrabsAndCylinders on Apr 13, 2017, 23:10:28
nice work!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 15, 2017, 10:35:22
nice work!

Thanks
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 15, 2017, 10:36:40
Started to make some exhaust when I realized that the bends I've had laying around are 1.5" and not 1.25, so it will have to wait until next week... in the meantime I'll get to work on the engines.

(https://uploads.tapatalk-cdn.com/20170415/d6feecccfba6e8c4f54cc2fbebe779a6.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 16, 2017, 00:02:55
Into the engines today. The last guy really helped me out...

(https://uploads.tapatalk-cdn.com/20170416/e2584cecf4ecdd86bf7b4a54a2d29979.jpg)

(https://uploads.tapatalk-cdn.com/20170416/3cd4cc3769744cd93c85570a7560bc02.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 19, 2017, 06:10:11
Engine parts degreased, blasted, painted and re-assembled.

(https://uploads.tapatalk-cdn.com/20170419/f4c17827808a63ef14f75828792426b7.jpg)

(https://uploads.tapatalk-cdn.com/20170419/ab535a21aadcad8c1ce429007c8f0903.jpg)

Where I had to stop for the day...

(https://uploads.tapatalk-cdn.com/20170419/229b480070de70597488b2de8094bb73.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Apr 19, 2017, 12:14:02
You don't waste any time!


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Apr 19, 2017, 12:15:22
I'm right behind you...(https://uploads.tapatalk-cdn.com/20170419/fcd122f72c8b27fce9b6aa94cba7d930.jpg)


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 19, 2017, 13:30:44
I'm right behind you...(https://uploads.tapatalk-cdn.com/20170419/fcd122f72c8b27fce9b6aa94cba7d930.jpg)


Sent from my iPhone using Tapatalk
You don't waste any time!

Thanks man, I'm trying to make a deadline to help out one of my customers with shipping.

Make sure you box in that tubing really well at the transition to the stamped frame member.

Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 25, 2017, 20:43:28
Got started on my stepped exhausts today. 1.25" to 1.5". The 1.25" is very close in length to the stock sleeves. The muffler has a 1" quiet core. One exhaust will be ceramic coated black and the other raw stainless.

(https://uploads.tapatalk-cdn.com/20170425/0d1de956e830084a64ecd52d739a0d52.jpg)

(https://uploads.tapatalk-cdn.com/20170425/09ab5729f9a6f515a8826db7b9de32d1.jpg)

Good fit-up makes good welds.

(https://uploads.tapatalk-cdn.com/20170425/cea988d8853c93404bb2a9fc9322f301.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Apr 26, 2017, 01:16:58


Make sure you box in that tubing really well at the transition to the stamped frame member.

Definitely will do. I'm also going to miter in a 1" round tube horizontally right behind the tank, just behind the square/round transition.
When you send your horizontal seat tubes forward, are you bending the tubing right before the tank, to insert into the square tubes? I forget, it's something like 5.5"  between those tubes, and I found that just squeezing my tubes from the hoop, to fit, doesn't allow the seat stays to align with the hoop tubes.
I guess I have to buy a tubing bender.


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on Apr 26, 2017, 01:19:49
That's an interesting exhaust transition. Gathering all the supplies to make a 1.25" SS exhaust myself. Still trying to come up with a flange, where it goes into the head.
Can you share a picture of yours?


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 27, 2017, 13:15:55
That's an interesting exhaust transition. Gathering all the supplies to make a 1.25" SS exhaust myself. Still trying to come up with a flange, where it goes into the head.
Can you share a picture of yours?


Sent from my iPhone using Tapatalk

I use the stock clamps, I like them.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 27, 2017, 14:14:20
A little paint preview.
(https://uploads.tapatalk-cdn.com/20170427/07695df9a20cd517db66cffeb72c3f5c.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: JesperHusky on Apr 27, 2017, 17:28:37
Got started on my stepped exhausts today. 1.25" to 1.5". The 1.25" is very close in length to the stock sleeves. The muffler has a 1" quiet core. One exhaust will be ceramic coated black and the other raw stainless.

(https://uploads.tapatalk-cdn.com/20170425/0d1de956e830084a64ecd52d739a0d52.jpg)

(https://uploads.tapatalk-cdn.com/20170425/09ab5729f9a6f515a8826db7b9de32d1.jpg)

Good fit-up makes good welds.

(https://uploads.tapatalk-cdn.com/20170425/cea988d8853c93404bb2a9fc9322f301.jpg)
Will this nice exhaust be available for sale someday?
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 27, 2017, 17:42:12
Will this nice exhaust be available for sale someday?

Yes, that is the plan. Handmade and purge welded with quality 16ga stainless. I am hoping to have pricing and a few sets ready to ship by the end of May. I'll probably start a thread on here, but I will definitely have the info on my website asap. CatskillMtnCustoms.com

Thanks for the interest!

Title: CB350 Scrambler Siblings
Post by: ncologerojr on Apr 30, 2017, 09:28:05
Stainless exhaust all tacked up and ready for finish welding. I'm really happy with this design.

(https://uploads.tapatalk-cdn.com/20170430/ceea29c3953e80a7a6cc72f960b71a85.jpg)

(https://uploads.tapatalk-cdn.com/20170430/570300a6fc663f36c3a740427c3dba96.jpg)

(https://uploads.tapatalk-cdn.com/20170430/0bc7fd1e4ebbff1bc47f122cabef16d6.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 01, 2017, 16:58:49
Engine #2 going together.
(https://uploads.tapatalk-cdn.com/20170501/f6e3ba70764a410e6c462d19ffa372fa.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 05, 2017, 17:08:29
Engines ready for install and another look at the paint. Just waiting for the frames to come back from powder coat to start final assembly.

(https://uploads.tapatalk-cdn.com/20170505/446e3dcd12cf69c63d33bd1d79b78bf8.jpg)

(https://uploads.tapatalk-cdn.com/20170505/ca469208a58c0e7cafdd2291cbca37f2.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: schenk on May 06, 2017, 03:17:10
These builds are so cool man! Can't wait to see the assembly of all the final parts.  8)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 06, 2017, 12:49:43
These builds are so cool man! Can't wait to see the assembly of all the final parts.  8)

Thanks man! I'm pretty excited to start bolting them together.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 11, 2017, 14:54:45
I've been waiting on my frames to come back from powder coating, so I've been doing little odds and ends so assembly will be a bit faster.

I did machine some aluminum lower fork seats for the powder coated forks. The coating prevented the originals from fitting so I turned these down on the lathe. I like them, they have a bit of a more modern feel.

(https://uploads.tapatalk-cdn.com/20170511/c64677c61c6b13bf066187b6d4c6ee51.jpg)

(https://uploads.tapatalk-cdn.com/20170511/269b4a9c2b885d6ef6929732eb577151.jpg)

(https://uploads.tapatalk-cdn.com/20170511/76f8752865552e47a705620606214863.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: CrabsAndCylinders on May 11, 2017, 15:03:36
Your work continues to impress!
Title: Re: CB350 Scrambler Siblings
Post by: jag767 on May 11, 2017, 15:19:20
Nick those look great- perhaps top ones to match?
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 11, 2017, 17:39:43
Your work continues to impress!

Thank you. I'm just trying to deliver a good product.

Nick those look great- perhaps top ones to match?

I did. But, I like the look of the stock uppers as seen on the left fork.

(https://uploads.tapatalk-cdn.com/20170511/edef14bd6e6ac859ddbd2258292ae147.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 11, 2017, 21:46:16
Also made the stainless headlight mounts. Good thing I have this mock-up frame to keep things going while the actual frames are at powder coat.

(https://uploads.tapatalk-cdn.com/20170512/e7a95e17e29a22a316e564a3de41c17f.jpg)
(https://uploads.tapatalk-cdn.com/20170512/121a2233517839c5a08a05d8df2ba481.jpg)
(https://uploads.tapatalk-cdn.com/20170512/d4bad0ad42b51b7e01317be780ba5640.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 13, 2017, 08:04:20
Headlight mounts polished up, and speedo mount made and polished. This front end is ready to roll.

(https://uploads.tapatalk-cdn.com/20170513/9b79a02334b4803e0304d234590b1d62.jpg)
(https://uploads.tapatalk-cdn.com/20170513/b1cfefb419840e2471194dc06225a659.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 17, 2017, 08:54:07
Starter delete plugs done, parts back from powder coat, and final assembly begins.

(https://uploads.tapatalk-cdn.com/20170517/c027d27ac600e775ea4de48598b0139e.jpg)

(https://uploads.tapatalk-cdn.com/20170517/ad8400a0353593f33f0d7fb766abc739.jpg)

(https://uploads.tapatalk-cdn.com/20170517/57773c05d3fa2703e7f56bc5d289f566.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 21, 2017, 11:34:26
More assembly, and started the wiring harnesses. With some luck, these will be road ready by the end of the week....

(https://uploads.tapatalk-cdn.com/20170521/df5e956bf6838cb84c8a1f9263af4c60.jpg)

(https://uploads.tapatalk-cdn.com/20170521/8c72757acddbe53445fe503f908257e8.jpg)

(https://uploads.tapatalk-cdn.com/20170521/55c634dab4e5f87a3b61a539ba7408e9.jpg)


Title: Re: CB350 Scrambler Siblings
Post by: schenk on May 24, 2017, 03:49:15
Looks great as usual!  8)
Title: Re: CB350 Scrambler Siblings
Post by: dannywrx88 on May 24, 2017, 05:52:41
You've set a high bar


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 24, 2017, 13:06:04
Looks great as usual!  8)
You've set a high bar


Sent from my iPhone using Tapatalk

Thanks guys. I'm pretty happy so far. Just trying to improve my work, little by little.
Title: Re: CB350 Scrambler Siblings
Post by: spotty on May 24, 2017, 21:16:30
You've set a high bar


Sent from my iPhone using Tapatalk

is he putting apehangers on?
Title: Re: CB350 Scrambler Siblings
Post by: 540Nova on May 24, 2017, 21:19:56
is he putting apehangers on?

LOL


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 25, 2017, 10:32:11
Some assembly progress.
(https://uploads.tapatalk-cdn.com/20170525/f7f2fa8c83de02e1a9f4a3eb011c2cad.jpg)

(https://uploads.tapatalk-cdn.com/20170525/b654191b92002b93efd08d27504ac316.jpg)

(https://uploads.tapatalk-cdn.com/20170525/4022a485b8e2fdcc3e9d1a23ba7e2270.jpg)

(https://uploads.tapatalk-cdn.com/20170525/9e5476e6559885d00f1e4bbb4e57a798.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: flamelspy on May 25, 2017, 12:00:44
Fantastic! Just found your post, i'm building a brat/scrambler with my cousin, it's gonna be his first bike. It's a Honda ML125 1983, and i'm seeing a lot of resemblances between our projects, including the rear led lights, tires.. following! Keep the good work!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on May 27, 2017, 09:07:54
Finished up the aluminum undertails yesterday.
(https://uploads.tapatalk-cdn.com/20170527/266398f7c5a85f40007650eadc9e5da8.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 06, 2017, 08:35:28
Just about finished with final assembly. Both bikes started right up. Just waiting for some clear weather to get for test rides and tune.

 (https://uploads.tapatalk-cdn.com/20170606/fc65b61ec7bf2819ed3ea5434076421c.jpg)

(https://uploads.tapatalk-cdn.com/20170606/166b1add4bd5f09a6709acadb6d2a3ca.jpg)

(https://uploads.tapatalk-cdn.com/20170606/e1ea79258d7cf2318386d9f852bf1086.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 06, 2017, 08:36:07
(https://uploads.tapatalk-cdn.com/20170606/0f709ca334a65b83f8f2fb7bf4e6b696.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: CrabsAndCylinders on Jun 06, 2017, 13:00:21
Beautiful, both of them!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 06, 2017, 16:58:29
Beautiful, both of them!

Thanks!
Title: Re: CB350 Scrambler Siblings
Post by: Bootsey on Jun 06, 2017, 20:30:08
Looking good! Couldn't quite tell from the pics, what are the colours on the tins - one in charcoal & one dark navy?
I vote there needs to be an unpainted build in the future to showcase your impressive metal work.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 06, 2017, 22:29:30
Looking good! Couldn't quite tell from the pics, what are the colours on the tins - one in charcoal & one dark navy?
I vote there needs to be an unpainted build in the future to showcase your impressive metal work.

Haha thank you. The colors are chevy cyber grey metallic, and BMW tanzanite blue metallic. The front fenders are a straight gloss black. I'm going to post a quick video that shows the colors a bit better.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 06, 2017, 22:31:07
https://youtu.be/fSr1dlBFKyk (https://youtu.be/fSr1dlBFKyk)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 09, 2017, 09:37:55
A peek at some details on the finished scramblers.

(https://uploads.tapatalk-cdn.com/20170609/fd1ba033b4515591f0a89ad575771ac1.jpg)

(https://uploads.tapatalk-cdn.com/20170609/7c40bb49876a88bb6ada5aff1e70edac.jpg)

(https://uploads.tapatalk-cdn.com/20170609/2f35b2efc2d1aee86d2f912b36b86411.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: CrabsAndCylinders on Jun 09, 2017, 19:20:54
Looks good!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 09, 2017, 20:05:05
Looks good!

Thanks man. Just did 50 trouble free miles on the blue one. Time to take the grey out for a spin.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 10, 2017, 12:17:42
Full hi-res shots coming soon.

(https://uploads.tapatalk-cdn.com/20170610/a003cd0ca2c8bee120456405903226fd.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: schenk on Jun 11, 2017, 06:46:51
Brilliant man! Can't wait for a nice set of HR pics   :D
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 11, 2017, 10:45:12
Brilliant man! Can't wait for a nice set of HR pics   :D

Thanks!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 24, 2017, 08:25:13
Here are some more hi-res shots. I have some much better set of photos which shows the bikes together, but I have to wait to post them for now.

(https://uploads.tapatalk-cdn.com/20170624/8afa29404e2dcf3b9af550e03fee83d2.jpg)

(https://uploads.tapatalk-cdn.com/20170624/b55b3a3b53855974c5d63e0ce24ac8bd.jpg)

(https://uploads.tapatalk-cdn.com/20170624/db970b04be6ef00d40d66543a04ae94d.jpg)

(https://uploads.tapatalk-cdn.com/20170624/b6e3893b256b2d3af6fb2fbaa71d980c.jpg)(https://uploads.tapatalk-cdn.com/20170624/3276a84226006b74d90a0c8846b44ee7.jpg)

(https://uploads.tapatalk-cdn.com/20170624/2e0b32c7dfa7a4834c0624d4c650d494.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 24, 2017, 08:27:22
(https://uploads.tapatalk-cdn.com/20170624/97fb11f99805c177083bf2f92543d843.jpg)

(https://uploads.tapatalk-cdn.com/20170624/c382c88d4f40b2d56b1c766309c9e976.jpg)

(https://uploads.tapatalk-cdn.com/20170624/fe7b8fe389b9d0cde00a4fa827a85ecf.jpg)

(https://uploads.tapatalk-cdn.com/20170624/6441f089e544fa6a4d32825905f62d7a.jpg)

(https://uploads.tapatalk-cdn.com/20170624/0daf1403b8e93656d6ea4b5239ce7259.jpg)

(https://uploads.tapatalk-cdn.com/20170624/75765eb1940ea924e2e2202bdd5bff0f.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: CrabsAndCylinders on Jun 24, 2017, 16:11:27
What a fantastic job you have done!

What a fantastic job you have done!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 24, 2017, 16:28:36
What a fantastic job you have done!

What a fantastic job you have done!

Thanks!
Title: Re: CB350 Scrambler Siblings
Post by: guernz on Jun 24, 2017, 19:35:19
Very nice work. I really like that brown seat. Very nice.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 24, 2017, 19:56:44
Very nice work. I really like that brown seat. Very nice.

Thank you. I like the brown as well. These seats were my wife's first upholstery job, I think she did pretty good!
Title: Re: CB350 Scrambler Siblings
Post by: kwak250 on Jun 25, 2017, 19:20:01
Thank you. I like the brown as well. These seats were my wife's first upholstery job, I think she did pretty good!
Just found this post, awesome bikes, and now for the big question?? How much ? And can you ship them??


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 25, 2017, 19:24:24
Just found this post, awesome bikes, and now for the big question?? How much ? And can you ship them??


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)

Thank you. Sorry, these bikes were pre-sold and shipped out to their new homes this week.
Title: Re: CB350 Scrambler Siblings
Post by: kwak250 on Jun 26, 2017, 02:16:22
Thank you. Sorry, these bikes were pre-sold and shipped out to their new homes this week.
Thanks, never hurts to ask


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)
Title: Re: CB350 Scrambler Siblings
Post by: cb250nproject on Jun 26, 2017, 07:45:45
Awesome builds love the fabrication of the panels and tanks flawless

Sent from my GT-I9305 using DO THE TON mobile app (http://r.tapatalk.com/byo?rid=89466)

Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 26, 2017, 08:44:54
Thanks, never hurts to ask


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)

Of course, always ask.
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jun 26, 2017, 08:45:50
Awesome builds love the fabrication of the panels and tanks flawless

Sent from my GT-I9305 using DO THE TON mobile app (http://r.tapatalk.com/byo?rid=89466)

Thank you!
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jul 12, 2017, 18:22:41
Here are some shots from a photo shoot with both the bikes. A complete photo set is now up on my website www.CatskillMtnCustoms.com

(https://uploads.tapatalk-cdn.com/20170712/5564ede8b56540b14afd72516296292b.jpg)(https://uploads.tapatalk-cdn.com/20170712/3c9145e20f1d247a8830aa2df7395500.jpg)
(https://uploads.tapatalk-cdn.com/20170712/79d5b3cfb24310a4f911f179e67f1435.jpg)
(https://uploads.tapatalk-cdn.com/20170712/6bb5d4d07820f02e9744474369bd6b32.jpg)
(https://uploads.tapatalk-cdn.com/20170712/da0eabe4b6563fc41c627725b3230adc.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jul 12, 2017, 18:26:22
(https://uploads.tapatalk-cdn.com/20170712/334e7564a7a6b97612f9fc3a484e4e60.jpg)
(https://uploads.tapatalk-cdn.com/20170712/f54732b24d5dedc557248a316564f5c0.jpg)

(https://uploads.tapatalk-cdn.com/20170712/a2c1527600e3279689d7b7d11b563aa7.jpg)
(https://uploads.tapatalk-cdn.com/20170712/4250369f2d1c1cfa12c459afe8f164af.jpg)(https://uploads.tapatalk-cdn.com/20170712/404e1d6251a0d9cca662c33e9b683b37.jpg)
Title: Re: CB350 Scrambler Siblings
Post by: dannywrx88 on Jul 14, 2017, 05:50:16
Beautiful


Sent from my iPhone using Tapatalk
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jul 14, 2017, 08:02:53
Beautiful


Sent from my iPhone using Tapatalk

Thanks!


Sent from my iPhone using DO THE TON (http://r.tapatalk.com/byo?rid=89466)
Title: Re: CB350 Scrambler Siblings
Post by: Popeye SXM on Jul 15, 2017, 21:15:26
Stunning and stunning, I would be a very happy customer if they were coming my way, nice work. Thanks for documenting the build.
Impressive brake pedal  :o
Title: Re: CB350 Scrambler Siblings
Post by: ncologerojr on Jul 17, 2017, 14:11:43
Stunning and stunning, I would be a very happy customer if they were coming my way, nice work. Thanks for documenting the build.
Impressive brake pedal  :o

Thank you!