DO THE TON

Stuff ya Want & Stuff ya Don't and Where to Get It if you Need It => Selling / Buying / Swapping / Spotting => SELLING => Topic started by: sixthwisconsin on May 15, 2019, 21:02:11

Title: cb550f header for sale
Post by: sixthwisconsin on May 15, 2019, 21:02:11
This has not been heat cured yet, you will need to do that after install by running the bike up to operating temperature.
I had this from another bike that I ended up not using. I refinished it along side one from one of my bikes.

https://www.kbs-coatings.com (https://www.kbs-coatings.com)

$125 plus shipping or pick up in Brookfield, WI.
PayPal & ApplePay available. PM me for details.

Finished product

(https://i.lensdump.com/i/WstD7k.jpg)

(https://i.lensdump.com/i/WstuRe.jpg)

(https://i.lensdump.com/i/WstYxa.jpg)

(https://i.lensdump.com/i/WstMeQ.jpg)

(https://i.lensdump.com/i/WstLJM.jpg)

(https://i.lensdump.com/i/Wstv8A.jpg)




Sand blasted

(https://i.lensdump.com/i/WmF5ea.jpg)

(https://i.lensdump.com/i/WmFx8M.jpg)



Primed

(https://i.lensdump.com/i/WmFbuA.jpg)



Original Finish

(https://i.lensdump.com/i/WRIEUC.jpg)

(https://i.lensdump.com/i/WRIRT2.jpg)

(https://i.lensdump.com/i/WRIty9.jpg)

(https://i.lensdump.com/i/WRIgQi.jpg)



Product used

(https://i.lensdump.com/i/WmFyQQ.jpg)



My header on my bike after heat cycle

(https://i.lensdump.com/i/Wsy7o2.jpg)

Title: Re: cb550f header for sale
Post by: sixthwisconsin on Jun 22, 2019, 12:37:55
After putting a few miles on my bike, the header looks great with no flaking or bubbling.