DO THE TON

Blood Sweat Tears and Grease => Engines => Topic started by: arudeseal on Jan 16, 2012, 19:45:12

Title: Cam and Valve Timing
Post by: arudeseal on Jan 16, 2012, 19:45:12
Another new guy question. I've searched for some good info regarding cam and valve timing, and my manual is pretty vague on the subject. The pictures show where the my cam end is at 12:00, and where my timing index mark is at the same point. Am I way off right now? I don't want to go any further until I know if I need to open up the top and reset my cam positioning.
(https://lh6.googleusercontent.com/-Cww5RKxAUJI/TxSzM_2eRyI/AAAAAAAAC4Y/ds75JvNMKVI/s640/2012-01-16_18-27-17_314.jpg)
(https://lh3.googleusercontent.com/-sefE680cEUI/TxSzPQx9y1I/AAAAAAAAC4g/o9k9g7nZ3lo/s640/2012-01-16_18-27-24_995.jpg)