DO THE TON

Blood Sweat Tears and Grease => Projects => Enduro / Dirt / Scramblers => Topic started by: xb33bsa on Mar 08, 2015, 22:22:53

Title: cushion drive for a spool hub
Post by: xb33bsa on Mar 08, 2015, 22:22:53
pretty self 'splanatory i wanted a cush drive on my SL/CL 350 hybrid so i cut off the cush drve of a yamaha dt hub and adapted it to the barnes hub that i am using
pics pretty much show what was done not shown in the added on hub is the bearing but yes it gets a bearing

pic 2 shows the majority of the machining, spoke flange removed and a register machined to fit the barnes hub
also i got rid of the cast iron center in the outer sprocket carrier and machined a better fitting lighter weight plastic delrin core/insert
Title: Re: cushion drive for a spool hub
Post by: xb33bsa on Mar 08, 2015, 22:25:22
mo pics
Title: Re: cushion drive for a spool hub
Post by: teledan on May 06, 2015, 11:51:36
Nice work!
Title: Re: cushion drive for a spool hub
Post by: Tune-A-Fishİ on May 06, 2015, 15:30:42
Pretty slick!  :o