collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: CB400F, the water bike.  (Read 2830 times)

Offline canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3984
  • 'hacking is learning'
Re: CB400F, the water bike.
« Reply #30 on: May 16, 2019, 13:27:19 »
Wild. 

Offline Hurco550

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 3977
  • Keep er' Between the ditches
Re: CB400F, the water bike.
« Reply #31 on: May 16, 2019, 16:23:34 »
Love it.

Sent from my SM-G920V using Tapatalk

"If you want safety and sanity don't mess around with choppers to begin with and don't come crying to me for recommending something that broke down the line. You're going to be the "builder" so use your own judgment and build to you own personal levels of safety and sanity." - Chopper Handbook
1988 tw200, the swamp donkey: http://www.dotheton.com/forum/index.php?topic=75455.0
1975 RD350 Road Racer: http://www.dotheton.com/forum/index.php?topic=70652.msg833688#msg833688
1976 GT250 Rebuild: http://www.dotheton.com/forum/index.php?topic=64973.new#new
Full Custom Pit Bike: http://www.dotheton.com/forum/index.php?topic=66954.new#new
"much ingenuity with a little money is more profitable and amusing than much money without ingenuity" - Arnold Bennet

Offline Rat_ranger

  • DTT BOTM WINNER
  • *
  • Posts: 444
Re: CB400F, the water bike.
« Reply #32 on: May 16, 2019, 23:58:58 »
Maybe another 1/2hr on the lathe and then it'll be ready for the mill. 

Offline Rat_ranger

  • DTT BOTM WINNER
  • *
  • Posts: 444
Re: CB400F, the water bike.
« Reply #33 on: May 18, 2019, 21:20:10 »
Drilled for wheel studs and rotor bolts.  Turned out my m8x1.25 tap is dull so I have to get a new one.

Offline Rat_ranger

  • DTT BOTM WINNER
  • *
  • Posts: 444
Re: CB400F, the water bike.
« Reply #34 on: May 21, 2019, 23:01:32 »
No pictures but I now know I need 2 brown and 2 green rod bearing sets and 5 brown main bearing sets.  Right now I gotta save up to get the cylinders bored and clean the cases.

Offline Rat_ranger

  • DTT BOTM WINNER
  • *
  • Posts: 444
Re: CB400F, the water bike.
« Reply #35 on: May 24, 2019, 02:06:41 »
Hey look, plenty of clearance.

Offline Hurco550

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 3977
  • Keep er' Between the ditches
Re: CB400F, the water bike.
« Reply #36 on: May 25, 2019, 09:12:48 »
Gnarly

Sent from my SM-G920V using Tapatalk

"If you want safety and sanity don't mess around with choppers to begin with and don't come crying to me for recommending something that broke down the line. You're going to be the "builder" so use your own judgment and build to you own personal levels of safety and sanity." - Chopper Handbook
1988 tw200, the swamp donkey: http://www.dotheton.com/forum/index.php?topic=75455.0
1975 RD350 Road Racer: http://www.dotheton.com/forum/index.php?topic=70652.msg833688#msg833688
1976 GT250 Rebuild: http://www.dotheton.com/forum/index.php?topic=64973.new#new
Full Custom Pit Bike: http://www.dotheton.com/forum/index.php?topic=66954.new#new
"much ingenuity with a little money is more profitable and amusing than much money without ingenuity" - Arnold Bennet