collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)  (Read 353285 times)

Offline crazypj

  • Posts: 13467
  • Split personality, I fake being smart
Top of stem is too long and wrong diameter.
I turned it down and re-threaded it
Should have left it about 1/8" longer as taper bearings have a slightly higher stack height (machined for ball or taper bearings on 360 frame)
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline crazypj

  • Posts: 13467
  • Split personality, I fake being smart
Woka, woka, woka  ;D
Brendon's latest idea is turning out pretty good.
 It's not too easy to make compound curves in metal without the proper equipment so, he started with a WOK  ;D

Cut a section off and a bit of beating on the sides


Almost done, everything roughed out quite well

Going to line it up on bike before cutting headlight hole (although that may have something 'interesting' done to it  ;) )
« Last Edit: Jan 20, 2013, 01:21:04 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline dcmspikes

  • Posts: 1001
nice.   i was toying with that idea, but i had not come up with using a wok.   from the cut-outs it looks like a pretty good shape.  cant wait to see it finished.

Offline Mydlyfkryzis

  • Posts: 3062
  • 当有疑问时踢你的敌人在生殖器上,你可以道歉后
    • CB360 Build
I like LOVE the idea....I don't like the steel...do they make aluminum woks?
There are 10 kinds of people, those who know binary and those who don't
Ignorance is bliss....and there are a lot of happy people out there!
AlphaDogChoppers: "A friend of mine once said, "There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots."
"if you need a hammer to do something...  you are probably doing it wrong" - LazloH

DTT Blue CB360 Club - We discriminate!
Mydlyfkryzis = Mid Life Crisis
------------------------------------------
1991 Honda Nighthawk 750
1976 Honda CB360t
http://www.dotheton.com/forum/index.php?topic=41649.new#new

Offline frogman

  • DTT SUPPORTER
  • *
  • Posts: 1965
  • '74 CB360, '71 CB450, '75 CB550SS
I've seen them in kitchen supply stores. The lids for the woks are aluminum at least.

Offline crazypj

  • Posts: 13467
  • Split personality, I fake being smart
It has to be steel, even though aluminium would be lighter
 Maybe he'll start a 'stir' (fry) trend? ;D
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline Mydlyfkryzis

  • Posts: 3062
  • 当有疑问时踢你的敌人在生殖器上,你可以道歉后
    • CB360 Build
General Tso's CB360?

With CB360 you get egg roll?

Ugh...I'll stop now....
There are 10 kinds of people, those who know binary and those who don't
Ignorance is bliss....and there are a lot of happy people out there!
AlphaDogChoppers: "A friend of mine once said, "There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots."
"if you need a hammer to do something...  you are probably doing it wrong" - LazloH

DTT Blue CB360 Club - We discriminate!
Mydlyfkryzis = Mid Life Crisis
------------------------------------------
1991 Honda Nighthawk 750
1976 Honda CB360t
http://www.dotheton.com/forum/index.php?topic=41649.new#new

Offline crazypj

  • Posts: 13467
  • Split personality, I fake being smart
Couldn't leave things at reply 666 any longer,this is 667, neighbor of the beast  ;D
Made a complaint to Magellan yesterday, they wanted me to switch off firewall and anti-virus to use the update software (not going to happen)
Anyway, they re-set everything this morning and e-mailed me to try again
Everything worked great, even got free map update to 2013 map  8) (didn't get update from new, you only get 30 days to download it, READ THE SMALL PRINT  ::) )
 Not a good day on bike though.  :(
Finally got round to painting a few things with HVLP touch up gun, dropped the damn headlight shell which rolled outside into leaves and crap, mudguard reacted in a few places so that's crinkled
Mounting got a piece of dirt from somewhere and I gave up before looking at frame,although that should be single colour
« Last Edit: Jan 30, 2013, 21:24:39 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline crazypj

  • Posts: 13467
  • Split personality, I fake being smart
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #668 on: Feb 09, 2013, 23:18:48 »
Changed the thread name again, hope it doesn't mess up anyones bookmarks? (if anyone has this bookmarked  ;D )
Anyway, mo dumb shit done  ;)
I was asked about lighter wheel/axle components, already made some alloy spacers for front and rear, around 12~14oz for back so far
 Today, I 'gun drilled' front axle
weight changed from 10.9 oz to 8.19oz
Was it worth it?
Probably not for the weight reduction but worth it to find out just how it could be done with small machines and to know I  probably won't be doing another one
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline Swagger

  • DTT SUPPORTER
  • *
  • Posts: 5513
  • Putting boot to ass since 1967!
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #669 on: Feb 10, 2013, 16:59:44 »
I'd imagine the butter they made those OE axles out of will be a wee bit more flexy as well. Fun exercise though....
.....there's no way that little rice cooker is going 100m/h when the work need to get up to those speeds includes a big fuck off fairing shaped like a giant cock. ~Staffy

Weiner tetanus is nothing to scoff at. ~JustinLonghorn