collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)  (Read 350858 times)

Offline DP9

  • Posts: 759
great sound.  so i looked up harris and what i found looked similar, but the price was like $400 for that little fucking can!!!!!  am i looking at the right thing?? 
BoneDaddy: "It's like genocide without the guilt and nobody is mad about it."

74 CB360 Project: Little Boy (first bike and build) - http://www.dotheton.com/forum/index.php?topic=22976.msg243623#msg243623

80 Kawi KZ750 twin Project: Warhorse - http://www.dotheton.com/forum/index.php?topic=23885.0

Offline bdn3d

  • Posts: 52
  • 1974 Honda CB 360T
    • Cafe-moto


maybe this one want vanish
Good things may come to those who wait, but only what's left by those who hustle...
-George Washington

http://www.meetup.com/Cafe-moto/

Offline bdn3d

  • Posts: 52
  • 1974 Honda CB 360T
    • Cafe-moto
great sound.  so i looked up harris and what i found looked similar, but the price was like $400 for that little fucking can!!!!!  am i looking at the right thing?? 

yep thats it... they are pricey. Thanks to Ringo though I got mine second hand, long story but price was not an issue. Thanks again Ringo!
Good things may come to those who wait, but only what's left by those who hustle...
-George Washington

http://www.meetup.com/Cafe-moto/

Offline crazypj

  • Posts: 13446
  • Split personality, I fake being smart
vimeo video is there now? (weird  :o )
 The motor is a lot quieter than the video makes it sound, there isn't anything like that much tappet noise.
 I guess it's a frequency that video camera's pick up as lots of engine/exhaust video's have same effect?  :-\
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline Swagger

  • DTT SUPPORTER
  • *
  • Posts: 5513
  • Putting boot to ass since 1967!
Yup, that's it exactly PJ....piezo mics used in phones and inexpensive voice recorders and such are biased (by nature of their design) for human speech, being roughly between 300-3000Hz. This is also where the ear is most sensitive so you're getting a double hit.

I never judge engine noise by video....that 360 sounds too crisp to suffer that much valve lash.
.....there's no way that little rice cooker is going 100m/h when the work need to get up to those speeds includes a big fuck off fairing shaped like a giant cock. ~Staffy

Weiner tetanus is nothing to scoff at. ~JustinLonghorn

Offline crazypj

  • Posts: 13446
  • Split personality, I fake being smart
Slowly moving on, afraid to use left arm until doc says it's OK, been way too long already.
Got frame etch primer and white primer, shows every little fault and problem  :(
Going to have to rub various area's down and do over
I also ordered some trick stuff today, should be here in a week or so, you'll like it  ;)

« Last Edit: Feb 08, 2012, 23:56:49 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline crazypj

  • Posts: 13446
  • Split personality, I fake being smart
Was going to post in 'latest purchase' but as it's for 360 though I may as well put it here. (I'll post there as well as not so many people look at build threads
 Got some 3/4" vents to fit into rear brake plate.
 I've had a hell of a job finding them and they are quite expensive ($1.65 EACH  :o )
I cant count, they are $0.68 each  ::)
Fit into an 5/8"~ 11/16" hole 9/16" and file or 'polish' with Dremel, only needs a few thou.
 I had to buy a lot more than I actually need (minimum order, $75.00, plus shipping :( )
If anyone wants a few you can have for same price I paid, plus whatever postage is going to cost ($2.80 with tracking in 48 and about $1.20 for a bubble mailer)
Not fitted yet, just place in rough position to see effect, I'll mark and drill soon, going to clean and paint or polish  brake plates
« Last Edit: Feb 12, 2012, 22:20:01 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline dcmspikes

  • Posts: 1001
those should look great.  good find

Offline Ringo

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 2675
I'll take some off your hands, PJ.  Paypal?  If so PM me your email, sir!
Chris

Offline crazypj

  • Posts: 13446
  • Split personality, I fake being smart
Just drilled the brake plate
To be fully functional, the vents needed moving in slightly.
 Made some measurements, needs 9/16" hole, then 'polished' to size with Dremel
 There is plenty of material to swage I'll probably just bend a couple of positions though

 
« Last Edit: Feb 12, 2012, 22:18:53 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0