Quantcast
collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)  (Read 356479 times)

Offline MGD

  • Posts: 372
    • 1989 Honda Hawk Build
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #750 on: Jul 09, 2013, 18:13:40 »
Looking good.  I like the whole bike, not just the exhaust.

Offline crazypj

  • Posts: 13488
  • Split personality, I fake being smart
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #751 on: Jul 11, 2013, 02:50:36 »
Decided to make a basic electronic ignition, use GM module and Hall Effect sensor circuit to trigger a dual fire coil with two magnets at 90 degrees (maybe, may use two sensors and single magnet, same as points set up,that will need GM 2 modules as well though)
Will use stock advancer mechanism until I can figure out a programmable one for cheap  ;D

 
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline trek97

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 6509
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #752 on: Jul 11, 2013, 08:13:15 »
Decided to make a basic electronic ignition, use GM module and Hall Effect sensor circuit to trigger a dual fire coil with two magnets at 90 degrees (maybe, may use two sensors and single magnet, same as points set up,that will need GM 2 modules as well though)
Will use stock advancer mechanism until I can figure out a programmable one for cheap  ;D


get er done! and Ill take one.

Offline Mydlyfkryzis

  • Posts: 3062
  • 当有疑问时踢你的敌人在生殖器上,你可以道歉后
    • CB360 Build
CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #753 on: Jul 11, 2013, 08:18:23 »
Decided to make a basic electronic ignition, use GM module and Hall Effect sensor circuit to trigger a dual fire coil with two magnets at 90 degrees (maybe, may use two sensors and single magnet, same as points set up,that will need GM 2 modules as well though)
Will use stock advancer mechanism until I can figure out a programmable one for cheap  ;D

for the cb360 with a 180 deg firing order you will need 2 sensors and 2 modules.  Otherwise you will be firing the coil on the intake of the right cylinder when the left needs a spark.




Sent from planet Earth using mysterious electronic devices and Tapatalk
There are 10 kinds of people, those who know binary and those who don't
Ignorance is bliss....and there are a lot of happy people out there!
AlphaDogChoppers: "A friend of mine once said, "There's no such thing as a stupid question, but there sure are a lot of inquisitive idiots."
"if you need a hammer to do something...  you are probably doing it wrong" - LazloH

DTT Blue CB360 Club - We discriminate!
Mydlyfkryzis = Mid Life Crisis
------------------------------------------
1991 Honda Nighthawk 750
1976 Honda CB360t
http://www.dotheton.com/forum/index.php?topic=41649.new#new

Offline crazypj

  • Posts: 13488
  • Split personality, I fake being smart
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #754 on: Jul 11, 2013, 13:14:24 »
I haven't looked into things too deep yet, I need to be able to turn motor over and look at things
I think it will work as a 'single fire' system but may not be very efficient
Will have to wait until I recover some more and can think straight  (I blame the drugs   ;D )
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline dcmspikes

  • Posts: 1001
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #755 on: Jul 15, 2013, 11:59:34 »
how did you make it so small?  i swear the GM module is bigger than what you show

Offline Worst cb650 ever

  • Posts: 1491
  • You can always get it running with time or money.
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #756 on: Jul 15, 2013, 12:44:54 »
Hey PJ, make sure you get one of the decent brands of GM ignition modules.  I've been burned by the cheapo $10 units. 

What Hall effect board is that?  It looks like it has a microcontroller already on board, hmm!  Neat stuff!
DTT Blue (cause Winter is Coming) CB360 Club.

1995 CBR900RR - a winter flip not worth a DTT writeup - Sold

1986 Yamaha SRX600 - mailed to me from California - build coming soon?

1983 VF750F

1976 CB360T

1993 CBR900RR - Sold

1979 CB650 - Sold

Offline crazypj

  • Posts: 13488
  • Split personality, I fake being smart
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #757 on: Jul 15, 2013, 15:37:00 »
No idea on specs of it, got it off e-bay for $10.00
It has digital and analog outputs, havent tried to find out anything else about it yet
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0

Offline suthern

  • Posts: 70
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #758 on: Jul 15, 2013, 17:09:35 »
Really curious about how the DIY electronic ignition works out. I wish I understood more about how the ignition system works because I'd like to try it out myself.

Offline crazypj

  • Posts: 13488
  • Split personality, I fake being smart
Re: CB360's-from build to blog - 2013, MDS (Mo Dumb Shit)
« Reply #759 on: Jul 15, 2013, 18:35:39 »
When I get it figured out and check it's reliable I'll probably put some sort of kit together
Still not allowed to 'play with machinery' so can't do a lot at present, I know I'm going to have to make a rotor/trigger to fit original advancer unit
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0