It's getting close folks!
Today I installed all the new cables. Black break, throttle, clutch, speedo, tach. The brake and clutch cables I had professionally shortened by a guy here in town. The tach and throttle cables didn't bug me with their length. I shortened the speedo housing with help from you guys, but I wound up ordering the Motion Pro inner wire kit for $12 instead of jacking with re-squaring the meter end of the inner wire. Not too bad. The clutch and brake are routed really smoothly and they lay down nice and tight to the bars. Very pleased with how this baby is turning out.
Also new in these pics is the rock guard on the headlamp. It's intended for a Jeep. I clipped off the outer ring to make it a smaller diameter and then installed from the inside, using the pressure from the bulb to hold it in place. It looks BOSS! It was a huge PITA to get the bulb back in to replace the pivot screws, but now that it's done it still adjusts just as it should... unless you guys have ever really looked at how the bulb is held into the headlight ring, this probably doesn't make sense. Anywoo... it looks awesome and really adds to the look IMO.
It's getting dang close to fire-it-up time... soon. Very soon. The weather here is still in the upper 90's+ so I'm not too worried about it... there is still plenty of good riding time to come.
More updates soon.