collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Any one know how to make a break line????  (Read 639 times)

Offline stript.714 o/c

  • Posts: 703
  • Monkey see monkey do is all i see now days!
Any one know how to make a break line????
« on: Feb 24, 2011, 17:46:28 »
 I want to make my self a coustume brake line. It seams like it would be easy.
 Any one out there with any info or sugestions on how to tackle this matter please feel free to chime Thanks!!!

Offline Redbird

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 4472
  • Dolor est Magister Optimus
Re: Any one know how to make a break line????
« Reply #1 on: Feb 24, 2011, 18:35:38 »
Check your local listings for a Hydraulic Hose shop, one that makes hoses for industrial equipment, and give them a call. Some NAPA locations make hydaulic hoses as well. Bring them your brake line and tell them what you need done.

There's a shop local to me that fabs hydro hose. I brought them the three OEM rubber brake lines from my Hayabusa and had them duplicate them in Stainless Steel braided. Not only did they make them while I waited, but they also oriented the ends properly so there were no twists in the lines when installed. In and out for under $50. (comparable kits from Russels and Galfer run $150-$200)
When you are Dead, you don't know that you are Dead. It is difficult only for Others.

It is the same when you are Stupid.

Offline Jewbacca

  • Posts: 1153
  • Therapy is expensive. Riding is cheap. You decide.
Re: Any one know how to make a break line????
« Reply #2 on: Feb 24, 2011, 19:59:15 »
http://www.cyclebrakes.com/index.html

They do custom brake lines for anything and everything. I'm ordering one of their 2 line kits to eliminate the splitter on the front forks. And you can get them in just about any color, or even with Aluminum ends...
1979 Honda CB750K- Soon to be CB750K-SC Night-Ninja (SOLD)
http://www.dotheton.com/forum/index.php?topic=18771.0
1974 TX500A "Yamahonda" http://www.dotheton.com/forum/index.php?topic=66736.0"
1983 Honda CB650SC
http://www.dotheton.com/forum/index.php?topic=70532.new#new
Gives me a major cramp in my wedding tackle..." Fellow PNW Rocker Dave Simmons

Offline Qckslvr

  • Posts: 173
Re: Any one know how to make a break line????
« Reply #3 on: Feb 24, 2011, 20:15:52 »
Galfer USA will make any line you want as well. They also have an economical kit where you buy fittings, and premade lengths of hose. Unless you have a 6-8 point crimping tool I would not attempt to make you own lines.

Offline stript.714 o/c

  • Posts: 703
  • Monkey see monkey do is all i see now days!
Re: Any one know how to make a break line????
« Reply #4 on: Feb 24, 2011, 20:29:23 »
 Thanks for the info guys. @ Redbird Thanks i will look in to this.