collapse

www.dimecitycycles.com

www.cognitomoto.com

https://www.townmoto.com/collections/vanson-leathers

www.speedmotoco.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.lostapostlejewelry.com

www.sparckmoto.com

www.pistonsociety.com


Author Topic: 75 CL360 Cafe Build  (Read 35007 times)

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #130 on: May 27, 2018, 14:32:49 »
Nice work. I ran a cable on mine, which I've found to work pretty well but may have been a bit of extra work involved.

You may find your rear brake will perform better if the cams are parallel to each other:

Yeah, these sets are a bit limiting on giving you flexibility for positions. Its all in 90 degree increments.

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #131 on: May 27, 2018, 14:39:52 »
New heavy duty clutch springs are a bit longer than stock. Oiling mods for the oil filter exit passage. Holes in the clutch basket to help keep it cool.
And had to replace my brand new Pirelli demon because it was cracking on the sides.

Offline MiniatureNinja

  • Posts: 519
Re: 75 CL360 Cafe Build
« Reply #132 on: May 28, 2018, 01:28:41 »
cool stuff. Dig that color scheme

one word of advice on those old school speed rearsets (I had them before I went back to stock) get some rod ends from QS components and replace those crapy 90* ends. they will kill you at worst and make adjustments and pedal feel terrible at best.
'75 Honda CB360 - thread

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #133 on: May 30, 2018, 13:50:36 »
cool stuff. Dig that color scheme

one word of advice on those old school speed rearsets (I had them before I went back to stock) get some rod ends from QS components and replace those crapy 90* ends. they will kill you at worst and make adjustments and pedal feel terrible at best.

Thanks for the tip. Absolutely will do.


Sent from my iPhone using DO THE TON

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #134 on: Jul 08, 2018, 15:40:52 »
Got new rod supports as recommended by @miniatureninja from qs components.


Sent from my iPhone using DO THE TON

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #135 on: Jul 08, 2018, 15:44:18 »
Also got new YSS rear shocks.


Sent from my iPhone using DO THE TON

Offline MiniatureNinja

  • Posts: 519
Re: 75 CL360 Cafe Build
« Reply #136 on: Jul 08, 2018, 17:29:02 »
Got new rod supports as recommended by @miniatureninja from qs components.


Sent from my iPhone using DO THE TON

sure does make it nice doesnt it? big improvement over what comes in the kit
'75 Honda CB360 - thread

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #137 on: Feb 25, 2019, 18:38:19 »
Finished... Until the 850 piston swap.
Thanks CrazyPJ for all your help with finishing up the carbs.

Offline Jimbonaut

  • DTT BOTM WINNER
  • *
  • Posts: 1779
    • Lost Apostle
Re: 75 CL360 Cafe Build
« Reply #138 on: Feb 25, 2019, 18:46:41 »
Holy sh#t - what an absolute beauty!  It's about minus 400 outside and blowing a freakin' gale but looking at this ride makes it feel like summer.  Congrats man, love everything about it
"I'm telling you Donnie, nuthin' but nuthin' but right"

Offline MrMister

  • Posts: 105
Re: 75 CL360 Cafe Build
« Reply #139 on: Feb 25, 2019, 19:52:50 »
Holy sh#t - what an absolute beauty!  It's about minus 400 outside and blowing a freakin' gale but looking at this ride makes it feel like summer.  Congrats man, love everything about it

Thank you.
I had "Summer" in mind for the colors. I think that's her name now.