collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!  (Read 17483 times)

Offline cinch

  • Posts: 84
    • CB200 Build Log
Re: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!
« Reply #60 on: Sep 20, 2015, 18:19:13 »
I put rs125 forks on my cb200, the brake works great will all stock aprilia parts, only addition was a PCD adapter to get the cb200 hub to match up with the  rs125 disc.

 http://www.dotheton.com/forum/index.php?topic=43873



Sent from my iPhone using Tapatalk
If it weren't for the few who pushed the limits, you wouldn't know where the limits are.

CB200 Build Log - http://www.dotheton.com/forum/index.php?topic=43873.60

Offline Sonreir

  • Moderator
  • DTT SUPPORTER
  • *
  • Posts: 10822
  • Oregon
Re: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!
« Reply #61 on: Sep 26, 2015, 11:48:41 »
I'm coming in way late on this one and I haven't read through the thread, but Little Horse Cycles in Hillsboro, OR makes these.

This one is on a recent CB450 build.
Sparck Moto - http://www.sparckmoto.com

Audaces fortuna iuvat.

1977 Honda CJ360 - Café SOS - Stage One™, Café SOS - Stage Two™
1976 Puch Maxi - APuchalypse Now
Suzi T500 Cobra Resto

Custom Gauge Graphics
Custom Wiring Harnesses

DTT Red, White, and/or Black 360 Club - Better than those Blue guys

Offline Redliner

  • Posts: 1176
Re: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!
« Reply #62 on: Sep 29, 2015, 03:13:02 »
These are 31mm forks.
I'm pretty sure I'd know if I were being manipulated by some overwhelming, mesmerizing, quasi-divine entity anointed by its own cult of personality. Nobody could be that stupid. So who's ready for the Super Bowl?

Offline MickyC

  • DTT BOTM WINNER
  • *
  • Posts: 1090
Re: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!
« Reply #63 on: May 14, 2018, 07:56:11 »
Found a caliper that works with existing wheel and disk. Yamaha r150.


Sent from my iPhone using DO THE TON

Offline Sonreir

  • Moderator
  • DTT SUPPORTER
  • *
  • Posts: 10822
  • Oregon
Re: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!
« Reply #64 on: May 14, 2018, 11:04:27 »
Holy thread resurrection, Batman!
Sparck Moto - http://www.sparckmoto.com

Audaces fortuna iuvat.

1977 Honda CJ360 - Café SOS - Stage One™, Café SOS - Stage Two™
1976 Puch Maxi - APuchalypse Now
Suzi T500 Cobra Resto

Custom Gauge Graphics
Custom Wiring Harnesses

DTT Red, White, and/or Black 360 Club - Better than those Blue guys

Offline crazypj

  • Posts: 13178
  • Split personality, I fake being smart
Re: Hydraulic Brake conversion for the CB200, lets make a kit!!??!!
« Reply #65 on: May 14, 2018, 12:07:01 »
That caliper looks just like some Honda ones I have, forget what they are off but have part number (one is in a box)Ever since I saw a Z1 'pull' the caliper off fork leg I've been very leary of calipers mounted in front of fork on cast lugs. BTW Matt, first time I've looked at thread in years, that hydraulic clutch conversion may work but looks way too bulky, they should have required cover to be welded for mount or machined up something that fitted into original hole (that's what I would do)
« Last Edit: May 14, 2018, 12:11:23 by crazypj »
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0