Looking good man!
How did you achieve the hammered look on the vinyl?
Thank you Brother!
The emblems started out as regular smooth vinyl, I dimpled them with the corners of a couple different sized screwdrivers and I also used two different nails! I wanted it to look really random so that is why I used different things to achive different size dimples, I actually found that a small screwdriver with a broken tip left the best marks.
To get the smooth finish I sprayed a couple coats of clearcoat over the decals and wet sanded the clear after it dried with 2500 sand paper, after I wet sanded I hand polished the clear with 3M compound.